Deco Art Matte Metallics - Amethyst
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for crafters seeking a sophisticated, low-sheen metallic finish for their projects. The key benefit is excellent adhesion and rich, smooth coverage in trendy colors. A potential caveat is that the matte finish may show brush strokes more readily than gloss paints if not applied carefully. DecoArt Matte Metallics, specifically the Amethyst variant, offers a durable, water-based coating with ultra-fine pigments for a smooth, rich look on various craft surfaces.
All features
| Model Part Number | DMMT13-30 |
|---|---|
| Brand | DecoArt |
Extended Product Information
FAQs
Is DecoArt Matte Metallics suitable for outdoor use?
While durable, this paint is best suited for indoor craft projects. For outdoor applications, consider a sealant designed for exterior use over the dried paint.
Can I use this paint on fabric?
This paint is primarily designed for rigid craft surfaces. It is not recommended for fabric as it may crack or peel when the fabric is flexed.
How many coats are typically needed for full coverage?
Depending on the surface color and texture, 2-3 thin coats are usually sufficient to achieve rich, opaque coverage.
What is the best way to clean up brushes?
Clean brushes immediately after use with soap and warm water. Rinse thoroughly until all paint residue is gone.
How long does it take for the paint to fully cure?
The paint will be dry to the touch in about 1-2 hours, but it requires 24-48 hours for a full cure to achieve maximum durability.
Can I apply a varnish or sealant over DecoArt Matte Metallics?
Yes, once fully dry and cured, you can apply a compatible water-based sealant or varnish for added protection. Test compatibility on a small area first.
What is the difference between Matte Metallics and other DecoArt metallic paints?
Matte Metallics provides a low-sheen, sophisticated metallic finish, whereas other DecoArt metallic paints may offer a higher gloss or shimmer effect.
Troubleshooting
Paint is too thick or streaky
Thin slightly with a small amount of water. Apply in thin, even coats, using smooth, consistent brush strokes. Allow each coat to dry before applying the next.
Poor adhesion or chipping
Ensure the surface was properly cleaned and prepped (lightly sanded if glossy). Reapply paint, ensuring adequate drying time between coats and for the final cure.
Brush marks are very visible
Use a high-quality, soft-bristled brush. Apply paint using a consistent direction. Consider a dry brush technique for a textured effect or applying a thin glaze layer.
Paint is not drying
Ensure the application is thin. High humidity or very thick coats can extend drying time. Allow more time in a well-ventilated area. Check the paint's expiration date.
Pros and Cons
Pros
- Offers a unique matte metallic finish not commonly found.
- Provides excellent coverage with minimal coats.
- Easy cleanup with soap and water.
- Durable and long-lasting on various surfaces.
- Good adhesion reduces the need for extensive priming.
Cons
- Matte finish can be less forgiving of surface imperfections.
- May require careful application to avoid visible brush strokes.
- Not suitable for high-gloss finishes.
- Drying time may vary depending on application thickness and humidity.
Setup, Compatibility & Care
Setup: Ensure your project surface is clean, dry, and free from dust or grease. Lightly sanding glossy surfaces can improve adhesion. Shake the paint well before use. Apply with a soft brush in thin, even coats.
Compatibility: DecoArt Matte Metallics adheres well to wood, plaster, metal, canvas, ceramic, and other porous craft surfaces. It is not recommended for flexible materials or surfaces that require high-gloss finishes. Test on an inconspicuous area if unsure.
Care: Once dry and cured (allow 24-48 hours for full cure), the finish is durable. Clean tools immediately after use with soap and water. For the painted project, a light dusting with a soft cloth is sufficient. Avoid abrasive cleaners or excessive moisture.