Schneider Electric NSYTRV62 Screw Terminal - 2 Position - 6mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Schneider Electric NSYTRV62 is a professional-grade 6mm² feed-through terminal block designed for industrial electricians and panel builders who require secure, high-performance wire termination. It serves as an essential building block for organized control cabinets, offering a robust screw-clamp connection system; however, users should ensure they have the correct screwdriver torque settings to avoid overtightening during installation.
All features
| Model Part Number | NSYTRV62 |
|---|---|
| Brand | Schneider Electric |
Extended Product Information
FAQs
What is the primary wire size for the NSYTRV62?
The terminal is specifically designed for 6mm² conductors.
Is this terminal block DIN rail mountable?
Yes, it is designed for standard DIN rail mounting systems.
Does this require a special screwdriver?
It requires a standard flat-head or Phillips screwdriver compatible with the screw head size provided on the terminal.
Can I use this for multi-level wiring?
The NSYTRV62 is a 2-position feed-through terminal, which is generally used for single-level, point-to-point connections.
Is this part of a specific product line?
Yes, it belongs to the Schneider Electric Linergy TR range.
Troubleshooting
Wire feels loose after tightening
Verify that the wire gauge matches the 6mm² specification and ensure the screw is fully engaged with the clamp plate.
Terminal will not snap onto DIN rail
Check the DIN rail for debris or deformations and ensure the terminal locking mechanism is in the fully open position before pressing.
Pros and Cons
Pros
- High-reliability screw terminal design
- Easy snap-on mounting for DIN rails
- Compact 6mm² footprint ideal for space-constrained panels
- Part of a reputable, standardized industrial ecosystem
Cons
- Requires manual screw tightening
- Dedicated only to 6mm² conductor sizes
- Not suitable for tool-less push-in wiring
Setup, Compatibility & Care
To install the NSYTRV62, align the base of the terminal with your standard DIN rail and press firmly until it snaps into position. For wiring, strip the insulation from your 6mm² conductor to the recommended length, insert the wire into the clamp, and tighten the screw using an appropriate screwdriver to the manufacturer's specified torque. To maintain the integrity of your system, periodically inspect the terminals during routine maintenance to ensure that screw connections remain tight and free of oxidation. Avoid using excessive force when tightening, as this may damage the clamp threads.