DecoArt Chalkboard Paint - Slate Grey
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This DecoArt Chalkboard Paint in Slate Grey is for DIY enthusiasts and crafters looking to transform surfaces into usable chalkboards. Its key benefit is creating a durable, washable chalkboard finish with a water-based acrylic formula. A caveat to consider is the recommendation to prep porous surfaces with a sealer for optimal adhesion and smoothness. This versatile paint allows you to customize furniture, walls, and decor items.
All features
| Model Part Number | DS122C-10 |
|---|---|
| Brand | DecoArt |
Extended Product Information
FAQs
How many coats of paint are recommended?
For optimal coverage and durability, 2-3 thin, even coats are generally recommended.
How long does it take for the paint to dry and cure?
The paint is dry to the touch in about 2 hours. However, it needs to cure for at least 72 hours before you can write on it or clean it.
Can I use this paint on a tabletop?
While it can be used on tabletops, it is best suited for surfaces that do not experience heavy abrasion. Consider applying a clear, protective topcoat over the cured chalkboard paint for added durability on high-use surfaces.
What is the best way to clean the chalkboard surface?
Use a clean, dry cloth or felt eraser for regular erasing. For tougher marks, a slightly damp cloth works, followed by immediate drying. Avoid abrasive cleaners.
Can I paint over this chalkboard paint later?
Yes, once fully cured, you can paint over DecoArt Chalkboard Paint with most latex or oil-based paints.
Does this paint come in other colors?
This specific product is the Slate Grey color. DecoArt may offer chalkboard paint in other colors under different product lines.
Do I need to use a primer?
A primer is not strictly necessary if the surface is properly prepared. However, for porous or rough surfaces, applying a coat of DecoArt Multi-Purpose Sealer is recommended for best results.
Troubleshooting
Paint is not adhering well
Ensure the surface was properly cleaned, sanded (if necessary), and that a sealer was used on porous materials. Make sure the paint was stirred thoroughly.
Surface is not smooth or has brush marks
Apply thinner coats and use a high-quality brush or foam roller. Allow sufficient drying time between coats. Lightly sand very lightly between coats if needed, and wipe clean before applying the next coat.
Chalk is difficult to erase or leaves residue
Allow the paint to cure for the full 72 hours before initial use. Use standard chalk sticks and a clean felt eraser. If residue remains, use a slightly damp cloth and dry thoroughly. Avoid using dustless chalk, which can be harder to remove.
Paint seems too thick or gloopy
Stir the paint very well. If still too thick, add a very small amount of water (no more than 1 teaspoon per pint) and mix thoroughly. Over-diluting can affect performance.
Pros and Cons
Pros
- Easy to apply with a brush or roller.
- Creates a smooth, erasable writing surface.
- Water-based formula allows for simple cleanup.
- Non-toxic and low odor for safer indoor use.
- Versatile for various DIY projects.
Cons
- Requires surface preparation (sanding, sealing) for optimal results on certain materials.
- Drying time may vary depending on application thickness and environmental conditions.
- Not suitable for extremely high-traffic areas without proper sealing.
- Chalkboard can be permanently damaged if abrasive cleaners are used.
- Color is limited to Slate Grey.
Setup, Compatibility & Care
Setup: Ensure the surface is clean, dry, and free of dust, grease, or wax. For rough or porous surfaces like unsealed wood or plaster, lightly sand the surface smooth and apply a coat of DecoArt Multi-Purpose Sealer. Allow the sealer to dry completely according to its instructions before proceeding. Stir the Chalkboard Paint thoroughly before and during use. Apply with a quality brush or foam roller, using thin, even coats. Allow at least 2 hours of drying time between coats. For best results, apply 2-3 coats.
Compatibility: This paint adheres to wood, metal, glass, ceramic, laminate, and previously painted surfaces. It is not recommended for flexible surfaces or areas that require high durability without additional protective coatings.
Care: Allow the painted surface to cure for a minimum of 72 hours before the first use. Use standard chalk sticks. To erase, use a clean, dry cloth or a felt eraser. For stubborn marks, a slightly damp cloth can be used, followed by drying the surface thoroughly. Avoid abrasive cleaners or solvents, as they can damage the chalkboard surface.