Araldite Rapid Epoxy Adhesive - 2 X 15Ml Tubes
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Araldite Rapid Epoxy Adhesive, featuring two 15ml tubes per pack, is designed for users needing strong, fast-setting bonds for quick repairs and projects. Its primary benefit is the rapid curing time, allowing for efficient work. A caveat is the need for precise mixing of the two components for optimal performance. The product offers a versatile, durable bond suitable for various materials, with a bulk supply ideal for frequent use.
All features
| Brand | Araldite |
|---|
Extended Product Information
FAQs
What is the working time for Araldite Rapid Epoxy?
The working time is typically around 5 minutes, depending on ambient temperature. This allows for quick application but requires prompt assembly of parts.
How long does it take to fully cure?
While it sets in minutes, full strength is typically achieved after approximately 1 hour. For optimal durability, avoid stressing the bond until fully cured.
Can this adhesive be painted?
Yes, once fully cured, the adhesive can be sanded and painted to match the surrounding material.
Is it waterproof once cured?
Once fully cured, Araldite Rapid Epoxy provides a water-resistant bond, suitable for many applications exposed to moisture, but it is not designed for continuous submersion.
How should I clean up uncured adhesive?
Uncured adhesive can be wiped away with a damp cloth and, if necessary, a small amount of solvent like acetone or alcohol. Ensure good ventilation when using solvents.
What is the shelf life of the product?
Unopened tubes, stored correctly in a cool, dry place, typically have a shelf life of around two years. Once mixed, the adhesive has a very short usable life.
Can I use this on Styrofoam or polystyrene?
No, this epoxy adhesive may dissolve or damage polystyrene foam. It is best avoided on such materials.
Troubleshooting
Adhesive is not setting or bonding properly.
Ensure equal amounts of resin and hardener were used and mixed thoroughly. Check that the components are within their expiry date and have been stored correctly. Verify the surfaces were clean and dry before application.
Bond is weak or brittle.
Incomplete mixing of resin and hardener is the most common cause. Ensure a uniform color is achieved during mixing. Also, ensure the adhesive was fully cured before subjecting it to stress.
Difficulty dispensing or mixing the two parts.
Ensure the nozzle caps are removed correctly. If the adhesive seems too stiff, ensure it has not been exposed to extreme temperatures during storage. Warm slightly by holding in hands if necessary, but avoid excessive heat.
Pros and Cons
Pros
- Very fast setting time allows for quick project completion.
- Creates a strong and durable bond suitable for demanding applications.
- Adheres well to a wide variety of common materials.
- Bulk packaging provides cost-effectiveness for frequent users.
- Easy to mix and apply for precise application.
Cons
- Limited working time due to rapid setting can be challenging for beginners.
- The amber/translucent color may not be suitable for all aesthetic requirements.
- Requires careful measurement and mixing of both components for full strength.
- Not ideal for very large surface area applications where extended working time is needed.
Setup, Compatibility & Care
Setup: Ensure both surfaces to be bonded are clean, dry, and free from dust or grease. Dispense equal amounts of resin and hardener onto a clean, disposable surface. Mix thoroughly with a spatula or stick until a uniform color is achieved. Apply the mixed adhesive to one or both surfaces, depending on the materials. Press the parts together firmly.
Compatibility: This epoxy adhesive is suitable for a wide range of materials including metal, wood, ceramics, glass, rubber, and many common plastics. It is generally not recommended for polyethylene, Teflon, or silicone rubber. Always test on an inconspicuous area if unsure.
Care: Store unused tubes in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure caps are securely fastened after each use. Once cured, the bonded area can be cleaned with a damp cloth. Avoid abrasive cleaners.