AK Interactive Rust Streaks Enamel Colour Wash - 35ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for modelers seeking to realistically depict rust streaks and corrosion effects on their models. The AK Interactive Rust Streaks Enamel Colour Wash offers an easy method for creating vertical rust and stain effects, providing a natural weathered look. Note that this is an enamel product, requiring proper ventilation and handling.
All features
| Model Part Number | AK00013 |
|---|---|
| Brand | AK Interactive |
Extended Product Information
FAQs
What is the best way to apply the Rust Streaks?
Apply using a fine-pointed brush in vertical lines from the upper parts of the model.
How long should I wait before softening the streaks?
Allow the paint to dry for approximately 10 minutes before softening with White Spirit.
What should I use to thin the enamel?
Use White Spirit or a similar enamel thinner.
Can I use this product on different scales?
Yes, it is suitable for various modeling scales.
How do I clean my brushes after use?
Clean brushes immediately after use with enamel thinner.
How should I store the enamel color wash?
Store in a cool, dry place, away from direct sunlight.
What should I do if the paint is too thick?
Add a small amount of enamel thinner to adjust the consistency.
Troubleshooting
Streaks look too harsh or unnatural.
Use a brush dampened with White Spirit to soften the streaks and blend them into the surface. Apply less paint and use multiple applications.
Paint is not adhering to the surface.
Ensure the model surface is clean, primed, and free of any oils or contaminants. Roughening the surface slightly can also help with adhesion.
Brush is clogging or drying out.
Clean the brush with enamel thinner frequently during application. Do not leave the brush in the paint for extended periods.
Pros and Cons
Pros
- Easy to use for creating realistic rust effects.
- The enamel formula ensures good adhesion to the model surface.
- Allows for easy blending and softening of the streaks with White Spirit.
- Provides a natural and weathered appearance on models.
- Suitable for various modeling scales and surfaces.
Cons
- Enamel products require adequate ventilation due to fumes.
- Requires White Spirit or a similar solvent for softening and cleaning.
- Drying time is needed for the enamel to set before handling.
- May require multiple applications to achieve desired effects.
- Care must be taken to avoid over-application, which can look unnatural.
Setup, Compatibility & Care
Setup:
- Preparation: Ensure your model surface is clean and primed.
- Shake Well: Shake the AK Interactive Rust Streaks Enamel Colour Wash well before each use to mix the pigments evenly.
Compatibility:
- Surfaces: Compatible with most plastic, resin, and metal model surfaces.
- Thinners: Use White Spirit or a similar enamel thinner for brush cleaning and softening effects.
Care:
- Storage: Store the bottle in a cool, dry place, away from direct sunlight.
- Ventilation: Work in a well-ventilated area to avoid inhaling fumes.
- Cleaning: Clean brushes with enamel thinner immediately after use to prevent the paint from drying and hardening.