Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This guide is for homeowners looking to add a stylish and functional upgrade to their kitchen. The Warren Reed - Designer Glass Kitchen Splashback offers a striking focal point with its high-resolution print on durable, toughened glass, providing an easy-to-clean surface. A potential caveat is the need for specific adhesive for installation, which is not always included.
| Model Part Number | WR01048-P450 |
|---|---|
| Brand | Warren Reed - Designer |
The splashback is available in several sizes including W600mm x H750mm, W700mm x H750mm, W900mm x H750mm, W600mm x H600mm, W600mm x H650mm, W700mm x H650mm, and W900mm x H650mm.
No, drilling holes is not recommended as it can compromise the structural integrity of toughened glass. Installation is done using adhesive.
We recommend using a clear, natural-curing adhesive. The 'ColorSpray Splashback Adhesive and Sealant' is specifically recommended for best results.
Yes, the premium 6mm toughened glass is designed to withstand heat, including hot oil splashes and temperatures up to 400°C.
Clean with a soft, damp cloth and a mild, non-abrasive kitchen cleaner. Wipe dry with a clean, lint-free cloth.
The splashback comes with a 1-year guarantee.
While possible, it's best to install on a smooth, flat surface. If tiles are perfectly flat and smooth, a strong adhesive might work, but professional advice is recommended to ensure adhesion.
Ensure the wall surface was clean, dry, and smooth before application. Verify that the correct type of natural-curing adhesive was used and applied according to instructions. Check adhesive cure times.
Use a recommended mild, non-abrasive kitchen cleaner and a soft cloth. Avoid harsh chemicals. Buff dry with a clean, lint-free cloth to prevent streaks.
This usually indicates an issue during adhesive application. If minor and not affecting appearance, it may be left. For significant bubbling, professional removal and re-installation might be necessary.
Contact customer support. The print is durable, but severe impact or improper cleaning chemicals could potentially affect it. Ensure no abrasive materials or cleaners were used.
Setup: To install, ensure the wall surface is clean, dry, and smooth. Apply a clear, natural-curing adhesive (like ColorSpray Splashback Adhesive and Sealant) evenly to the back of the glass or the wall according to the adhesive manufacturer's instructions. Carefully position the splashback onto the wall, pressing firmly to ensure good contact. Allow the adhesive to cure fully before cleaning or using the kitchen.
Compatibility: This splashback is designed for standard kitchen walls. It is compatible with most standard hob types, including gas and electric. Ensure you measure your space accurately to select the correct size.
Care: Clean regularly with a soft, damp cloth and a mild, non-abrasive kitchen cleaner. Avoid using harsh chemicals, scouring pads, or abrasive cleaners that could damage the glass surface or the print. Wipe up spills and splatters promptly to prevent staining.
