Laser Tools Multi-Function Car Jump Starter 12V - 9344
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Laser Tools Multi-Function Car Jump Starter is designed for drivers needing reliable roadside assistance. It offers the primary benefit of jump-starting petrol engines up to 6.0L and diesels up to 4.0L, serving as a robust power bank and an emergency light. A potential caveat is its 6-hour charging time. Key features include a 600A start current, 1200A peak current, USB device charging, built-in LED lights with SOS and strobe functions, and a 150psi tyre inflation pump. Safety is enhanced with multiple protection mechanisms.
All features
| Model Part Number | 9344 |
|---|---|
| Brand | Laser Tools |
Extended Product Information
FAQs
How long does it take to fully charge the jump starter?
The Laser Tools Multi-Function Car Jump Starter takes approximately 6 hours to fully charge from empty using a suitable USB power source and the included USB Type-C cable.
What is the battery capacity?
The product information specifies a Li-Po NCM battery, but the exact Amp-hour (Ah) or milliamp-hour (mAh) capacity is not detailed. However, it provides a 600A start current and 1200A peak current.
Can I use this jump starter for larger trucks or commercial vehicles?
This jump starter is rated for petrol engines up to 6.0L and diesel engines up to 4.0L. It is not recommended for larger commercial vehicles or engines exceeding these specifications.
How do I know when the battery is fully charged?
The jump starter features a charging indicator that will show the battery's status. Refer to the manual for specific details on how the indicator signals a full charge.
What safety features are included?
It includes protection against short circuits, overcharging, over-discharging, low voltage, and reverse polarity.
Can the tyre inflator be used for car tires?
Yes, the built-in 150psi tyre inflation pump is suitable for inflating car tires, though it may take longer than a dedicated air compressor for significant inflation needs.
Is the USB Type-C cable included?
Yes, the package includes a USB Type-C charging cable.
Troubleshooting
Jump starter not turning on
Ensure the unit is charged. Connect to a power source using the USB-C cable and check the charging indicator. If it still does not power on, contact support.
Vehicle not starting after jump attempt
Verify the clamps are securely attached to the correct battery terminals. Ensure the jump starter has sufficient charge. Try jump-starting again after a short rest for the jump starter. If the issue persists, the vehicle's battery may be critically damaged or there might be another underlying problem.
Tyre inflator not working
Check that the pump is switched on and the hose is securely attached to the tire valve. Ensure the jump starter has adequate battery charge. Listen for any unusual noises indicating a blockage.
USB port not charging devices
Confirm the jump starter has sufficient charge. Try a different USB cable and ensure the connected device is compatible with the output. Check the charging indicator on the jump starter.
LED lights not functioning
Ensure the jump starter has sufficient charge. Cycle through the light modes by pressing the power button. If lights still do not activate, there may be an internal issue.
Pros and Cons
Pros
- Versatile multi-functionality (jump starter, power bank, light, inflator)
- Sufficient power for a wide range of petrol and diesel engines
- Multiple safety features enhance user confidence
- Portable design for easy storage in a vehicle
- Built-in LED lights with emergency modes
Cons
- Relatively long charging time of approximately 6 hours
- Tyre inflator may be slower than dedicated pumps for larger tires
- Requires compatible USB-C cable for charging (though one is included)
Setup, Compatibility & Care
Setup:
- Ensure the jump starter is fully charged before first use. Connect the included USB Type-C cable to the charging port and a suitable power source. The charging indicator will show the battery status.
- To jump-start, connect the red clamp to the positive (+) battery terminal and the black clamp to the negative (-) terminal or a suitable ground point on the engine block. Do not allow clamps to touch each other.
- Turn the jump starter on and attempt to start the vehicle. Once started, disconnect the clamps within 30 seconds, starting with the black clamp.
Compatibility:
- Suitable for 12V petrol engines up to 6.0L and diesel engines up to 4.0L.
- USB output is compatible with most USB-powered devices like smartphones, tablets, and GPS units.
- Tyre inflator nozzle is standard for most car tires and bicycle valves.
Care:
- Store the jump starter in a cool, dry place, away from direct sunlight and extreme temperatures.
- Recharge the unit at least every 3-6 months to maintain battery health, even if not in regular use.
- Keep the battery terminals and clamps clean and free from corrosion.
- Avoid dropping the unit or exposing it to excessive moisture.
- Use only the provided USB Type-C cable for charging.