Tsukineko Versacraft Ink Pad - Cherry Pink
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Tsukineko Versacraft Ink Pad in Cherry Pink is designed for crafters looking to add permanent, vibrant color to a variety of surfaces, especially fabric. Its key benefit is the ability to create lasting designs on materials like textiles, paper, and wood. However, achieving permanence on fabric requires a heat-setting step, and ink may wash out before this is completed.
All features
| Model Part Number | vks-115 |
|---|---|
| Brand | Tsukineko |
Extended Product Information
FAQs
What surfaces can I use the Versacraft ink pad on?
You can use it on fabric, unpainted wood, uncoated paper, Japanese papers, tanned leather, and unglazed pottery.
How do I make the ink permanent on fabric?
After stamping and allowing the ink to dry, heat set it with an iron on a high cotton setting for at least 15 seconds. Use a protective cloth between the iron and the fabric.
Can I wash items stamped with Versacraft ink?
Yes, once properly heat-set on fabric, items can be washed delicately at a maximum of 40°C. Results may vary depending on the fabric type.
How long does the ink take to dry?
Drying time varies greatly depending on the surface material, humidity, and temperature. Allow sufficient time for drying before heat setting or handling.
What is the size of the ink pad?
The ink pad itself has a raised surface size of 25 x 25 mm.
Can I use this ink on painted surfaces?
The Versacraft ink is recommended for unpainted wood. For painted surfaces, test on a small, inconspicuous area first, as adhesion can vary.
What happens if I don't heat set the ink on fabric?
The ink may wash out completely when the fabric is laundered. Some staining might still occur before washing, even if the ink itself washes away.
Troubleshooting
Ink not permanent on fabric
Ensure the fabric was properly heat-set with an iron on a high setting for at least 15 seconds, using a pressing cloth. Re-heat set if necessary.
Ink washes out before heat setting
This is normal for fabrics. Ensure you heat set the design as soon as the ink is dry to the touch, or as soon as practically possible. Pre-wash fabric to remove sizing before stamping, as sizing can affect ink adhesion.
Ink appears faded or streaky
Check if the ink pad is still moist. If dry, it may need re-inking with compatible Tsukineko ink (sold separately). Ensure the stamp is clean and has even ink coverage.
Stamp is not picking up enough ink
Gently press the stamp onto the ink pad, rocking it slightly to ensure full coverage. The pad is raised, allowing for easy inking of larger stamps.
Ink smudges after application
Allow adequate drying time before touching the stamped area. If smudging persists on non-porous surfaces, ensure the surface is properly prepared and dry. Heat setting may also resolve minor smudging issues on appropriate materials.
Pros and Cons
Pros
- Excellent adhesion to a wide range of craft materials.
- Permanent and archival quality when heat-set correctly.
- Vibrant Cherry Pink color adds a cheerful touch.
- Washable on fabric after heat setting (within limits).
- Suitable for detailed stamping with its small pad size.
Cons
- Requires heat setting for permanence on fabric and wood.
- Ink can wash out of fabric before heat setting.
- Drying time varies significantly by surface and environmental conditions.
- Best results on textiles require specific ironing techniques.
- May leave some staining on fabric even if ink washes out before heat setting.
Setup, Compatibility & Care
Setup: The Versacraft ink pad is ready to use straight out of the packaging. Ensure the removable cover is in place when not in use to prevent the ink from drying out.
Compatibility: This ink pad is compatible with a variety of crafting surfaces, including:
- Fabric: Cotton, linen, and other natural fibers (requires heat setting).
- Wood: Unpainted wood (requires heat setting).
- Paper: Most uncoated papers, including cardstock and Japanese papers.
- Leather: Tanned leather.
- Pottery: Unglazed terracotta or pottery.
Care:
- Ink Pad Storage: Always replace the lid firmly after use. Store the pad flat in a cool, dry place away from direct sunlight to maintain ink quality.
- Cleaning Stamps: Clean your stamps immediately after use with water and a mild soap, or a stamp cleaner, to prevent ink from drying on the stamp surface.
- Heat Setting (Fabric): For best results on textiles, use an iron set to the 'cotton' or high heat setting for a minimum of 15 seconds. Place a protective cloth between the stamp and the iron. Test on a scrap piece of fabric first. Gentle, delicate washing (max 40°C) is recommended after heat setting.
- Heat Setting (Wood/Pottery): Use a hairdryer on a medium to high setting, or a heat gun, moving it constantly over the stamped area for a few minutes until the ink is dry and permanent.