Furniture Clinic Worktop Care Kit
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Furniture Clinic Worktop Care Kit is designed for homeowners and DIY enthusiasts looking to protect and enhance their wooden worktops. Its primary benefit is providing a comprehensive solution to prevent stains and spills while highlighting the natural beauty of the wood. A potential caveat is that it requires regular application for optimal, long-term protection. This kit includes a premium worktop oil, a wood cleaner, a spray bottle for easy application, foam brushes, lint-free cloths, de-nibbing pads, and vinyl gloves, offering everything needed for both cleaning and oiling.
All features
| Brand | Furniture Clinic |
|---|
Extended Product Information
FAQs
How often should I re-oil my worktop?
Re-oiling frequency depends on usage. Typically, reapplication is recommended every 6-12 months, or whenever the wood appears dry or water is no longer repelling effectively.
Can I use this kit on a previously varnished or sealed worktop?
No, this kit is designed for oiled wood finishes. If your worktop is varnished or sealed, you will need to remove the previous finish completely before applying the oil.
What is the dilution ratio for the Wood Cleaner?
The Wood Cleaner is designed to be diluted at a 4:1 ratio (4 parts water to 1 part cleaner) for everyday cleaning.
How long does the oil take to dry?
After application, allow the oil to penetrate for 15-30 minutes. The surface should be cured and ready for light use after 12-24 hours.
Can I use this on a butcher block island?
Yes, this kit is suitable for all types of wooden worktops, including butcher block islands made from solid wood.
What should I do if I get oil on my clothes?
Act quickly to treat the stain. For fresh oil stains, try applying a stain remover or dish soap directly to the spot and washing as usual. Avoid tumble drying until the stain is gone.
Is the oil food safe once cured?
Yes, once fully cured, the Worktop Oil creates a safe surface for food preparation.
Troubleshooting
Worktop appears blotchy or uneven after oiling.
This can happen if excess oil was not wiped away completely or if the oil was applied unevenly. Ensure all excess oil is buffed off after the recommended penetration time. For severe blotchiness, a light sand and reapplication might be necessary.
Wood cleaner is not effective on tough stains.
For stubborn stains, try using a slightly more concentrated cleaner solution or allow the cleaner to sit on the stain for a few minutes before wiping. Ensure you are using the correct dilution ratio for everyday cleaning.
New oil application does not seem to repel water.
The worktop may require multiple coats of oil to build up a sufficient protective layer. Ensure the surface is fully dry and cured between coats. Check if the previous oil application has worn away completely.
The kit components are not enough for the entire area.
The coverage is estimated at 20m². If your area is larger or requires more coats than anticipated, you may need to purchase additional Worktop Oil separately.
Pros and Cons
Pros
- Provides excellent protection against common household stains and spills.
- Enhances the natural aesthetic of wooden worktops by bringing out grain and color.
- Offers a complete, all-in-one solution for worktop maintenance.
- Suitable for a wide range of common wooden worktop materials.
- Includes reusable tools for easy and efficient application.
Cons
- Requires regular reapplication of oil to maintain protection and appearance.
- The initial oil application may require some time and effort.
- Not suitable for laminate or synthetic worktop materials.
Setup, Compatibility & Care
Compatibility: This kit is designed for use on all types of wooden worktops, including but not limited to oak, beech, and walnut. It is also suitable for other oiled wooden surfaces.
Setup & Application:
- Preparation: Ensure the worktop is clean, dry, and free from dust. If the surface is heavily soiled or has old finishes, it may need sanding with the de-nibbing pads first.
- Cleaning: For daily cleaning, dilute the Wood Cleaner with water at a 4:1 ratio (cleaner:water) and use the provided spray bottle. Spray onto the surface and wipe clean with a lint-free cloth.
- Oiling: Apply a thin, even coat of the Worktop Oil using the foam brushes or lint-free cloths. Work the oil into the wood, ensuring all areas are covered.
- Drying: Allow the oil to penetrate for approximately 15-30 minutes. Wipe away any excess oil that has not soaked in with a clean lint-free cloth.
- Curing: Allow the oiled surface to cure for at least 12-24 hours before use. Multiple coats may be applied for greater protection, with a light de-nibbing between coats if necessary.
Care:
- For regular maintenance, use the diluted Wood Cleaner.
- Reapply the Worktop Oil as needed, typically every 6-12 months depending on usage, or when the wood starts to look dry or absorb water more readily.
- Always wear the provided vinyl gloves when handling the oil and cleaner.