WG10+ White Grease with PTFE - 500mL
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The WG10+ White Grease with PTFE is designed for industrial and maintenance applications, particularly in anti-friction plain bearings and pumping equipment where water ingress can compromise lubrication. Its key benefit is extending the life of lubricated parts under challenging conditions like high pressure and vibration. A minor caveat is its specific formulation, making it best suited for applications described rather than general-purpose use.
All features
| Model Part Number | ASO0505 |
|---|---|
| Brand | Aerosol Solutions |
Extended Product Information
FAQs
What is the primary benefit of using PTFE in this grease?
PTFE (Polytetrafluoroethylene) provides exceptional anti-friction properties, significantly reducing wear and allowing components to move more freely, even under high loads.
Can this grease be used on plastic parts?
While primarily formulated for metal components, it's advisable to test on an inconspicuous area of plastic parts first, as compatibility can vary.
How long does the lubrication typically last?
The longevity depends on the operating conditions, including exposure to water, pressure, and vibration. However, its formulation is designed for extended service life compared to standard greases.
Is this product suitable for extreme temperatures?
The product description highlights performance under high pressure and impact, but specific temperature range data is not provided. It is best suited for typical industrial operating temperatures.
How should I dispose of an empty aerosol can?
Dispose of empty aerosol cans according to local regulations for pressurized containers and chemical waste. Puncturing the can is not recommended.
Can this grease be used for general household lubrication?
While it can lubricate items like hinges, its specialized formulation is optimized for industrial anti-friction and water-resistant applications, so general-purpose options might be more suitable for household needs.
Troubleshooting
Uneven spray or nozzle blockage
Ensure the can was shaken thoroughly. If the nozzle is blocked, remove it and soak in a suitable solvent, then clear with a fine pin. Alternatively, replace the nozzle if possible.
Grease not adhering properly
Ensure the surface is clean and dry before application. Remove any old lubricant or contaminants. Reapply a thin, even coat.
Lubrication effectiveness seems reduced
Check for excessive water ingress or extreme pressure beyond the product's specified limits. Ensure the correct application method was used and reapply as needed.
Pros and Cons
Pros
- Excellent lubrication in wet conditions.
- Significantly extends the lifespan of treated parts.
- Provides robust protection against corrosion and wear.
- Easy to apply evenly with the aerosol format.
- Effective under extreme pressure and vibration.
Cons
- Not a general-purpose lubricant; best for specific industrial applications.
- Requires proper ventilation during use due to aerosol nature.
- May require specific cleaning agents for removal if over-applied.
Setup, Compatibility & Care
Setup: Shake the aerosol can vigorously before use. Hold the can upright and spray from a distance of 15-20 cm directly onto the clean, dry surface requiring lubrication. For best results, apply a thin, even coat.
Compatibility: This product is designed for use on metal components and anti-friction bearings. Avoid contact with electrical components unless specifically intended for such use. Always test on an inconspicuous area if unsure about compatibility with specific materials.
Care: Store the can in a cool, dry place away from direct sunlight and sources of ignition. Ensure the nozzle is clean after each use. If blockage occurs, follow the manufacturer's instructions for clearing the nozzle. For cleaning residual grease, use a suitable degreaser or solvent, ensuring adequate ventilation.