Dimplex Winterwarm Down Flow Heater - 2kw
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide helps users effectively utilize the Dimplex Winterwarm WWDF20E 2kW Downflow Fan Heater, a bathroom-focused heater designed for rapid heating. Its powerful 2kW output, alongside the energy-saving timer, ensures quick warmth, though users should note the unit requires a 3-core fused installation, as it comes without a cable.
All features
| Model Part Number | WWDF20E |
|---|---|
| Brand | Dimplex |
Extended Product Information
FAQs
What is the warranty period?
The Dimplex Winterwarm WWDF20E comes with a 2-year guarantee.
Can this heater be used in any room?
While designed for bathrooms, it can be used in other rooms. However, ensure it is mounted correctly and away from water sources.
How do I activate the heater?
The heater is activated by pulling the cord.
What safety features does it have?
It features a double-insulated, flame-retardant casing, thermal fuse protection, and is IP22 rated for water spray protection.
What is the IP rating?
The IP rating is IP22, providing protection from touch by fingers and objects greater than 12mm, and protection from water spray less than 15 degrees from vertical.
What if the heater is not heating effectively?
Ensure the vents are clear and the unit is not blocked. Check the output setting and consider whether the room size matches the heater's output.
Can I install it myself?
No, it must be installed by a qualified electrician due to the 3-core fused installation requirement.
Troubleshooting
Heater does not turn on.
Check the power supply and ensure the unit is correctly wired. Also, verify that the pull cord is activated.
Heater is not producing heat.
Check the thermal fuse; if tripped, the unit may need professional servicing. Also, verify the output setting (1kW/2kW).
Heater turns off after a short time.
The 30-minute timer may have expired. If not, check for overheating (blocked vents) or a possible fault requiring professional attention.
Pros and Cons
Pros
- Fast and effective heating due to 2kW output.
- Energy-efficient with a 30-minute auto runback timer.
- Easy to operate with a pull cord.
- Designed with safety in mind, including thermal fuse protection.
- Compact size suitable for bathrooms and smaller rooms.
- Comes with a 2-year guarantee.
Cons
- Requires a 3-core fused installation as it is supplied without a cable.
- Output may be excessive for very small spaces if only the 2kW setting is used.
- Installation requires basic electrical knowledge.
- Limited to downflow direction, which may not suit all room layouts.
Setup, Compatibility & Care
Setup:
- Installation: The heater must be installed by a qualified electrician, as it requires a 3-core fused installation. Ensure the power supply is off before commencing.
- Mounting: Follow the manufacturer's instructions for mounting the heater securely on the wall, away from water sources.
- Wiring: Connect the heater to the power supply, ensuring correct polarity and fuse rating.
- Testing: Once installed, switch on the power and test the heater to ensure it functions correctly.
Compatibility:
- Power Supply: Compatible with a 230-240V AC power supply.
- Environment: Designed for indoor use, particularly in bathrooms, but suitable for other areas as well.
Care:
- Cleaning: Wipe the exterior with a soft, damp cloth. Avoid using abrasive cleaners or solvents.
- Ventilation: Ensure the air inlet and outlet are not blocked to maintain optimal performance.
- Inspection: Periodically check for any damage or wear and tear, and have it serviced by a qualified technician if necessary.