Silverhook Bike Lube Wet Chain Bike Drip Bicycle Lubricant Rust Proof - 200ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for cyclists who ride in wet, muddy, or challenging conditions and need reliable chain lubrication. The Silverhook Wet Chain Lube offers a key benefit of deep penetration for smooth gear changes and superior corrosion protection, ensuring efficient performance on long rides. A potential caveat is that its formulation is optimized for wet conditions and may not be the best choice for dry, dusty environments.
All features
| Model Part Number | CYBL01 |
|---|---|
| Brand | Silverhook |
Extended Product Information
FAQs
When should I use wet chain lube?
Wet chain lube is best used for cycling in consistently wet, muddy, or humid conditions. It provides superior protection against water washout and corrosion in these environments.
Can I use this lube in dry conditions?
While it will lubricate, wet lubes tend to attract more dust and dirt in dry conditions, which can wear down your drivetrain faster. For dry conditions, a dry lube is generally recommended.
How often should I reapply the lube?
Reapply after every long ride, especially if it involved wet or muddy conditions, or after washing your bike. For regular dry riding, it might need less frequent application, but in wet conditions, every 100-150 km or after each wet ride is a good guideline.
Do I need to clean my chain before every application?
It's highly recommended to clean and dry your chain before applying any new lubricant, especially when switching types or after riding in dirty conditions. This ensures optimal performance and longevity.
What does 'penetrates deep into chain links' mean?
It means the liquid lubricant is thin enough to get past the outer plates and into the rollers and pins of the chain, where the most critical lubrication happens, ensuring the entire mechanism is coated.
Is this product safe for all bike chains?
Yes, Silverhook Wet Chain Lube is designed for standard bicycle chains and is compatible with most types of bicycle drivetrains.
How much lubricant should I use?
Apply a small drop to each roller of the chain. The key is to lubricate the rollers and pins. Wiping off excess is crucial to prevent dirt attraction.
Troubleshooting
Chain is noisy or stiff after application
You may have not applied enough lubricant, or excess lubricant was not wiped off properly, attracting dirt. Clean the chain thoroughly and reapply, ensuring excess is wiped off.
Gears are not shifting smoothly
The chain may be dirty or in need of lubrication. Clean the chain and apply fresh lubricant. Ensure the derailleur is also clean and properly adjusted.
Chain shows signs of rust
The chain may not have been properly cleaned and dried before lubrication, or the lubricant has been washed off by excessive water. Clean any existing rust, dry thoroughly, and reapply the wet lube.
Lube seems to wash off too easily
Ensure the chain was clean and dry before application. Allow sufficient time for the lube to penetrate before wiping excess. Reapply more frequently if riding in extremely wet conditions.
Pros and Cons
Pros
- Excellent performance in wet and muddy conditions.
- Provides effective rust and corrosion protection.
- Ensures smooth and quiet gear operation.
- Helps maintain drivetrain efficiency on long rides.
- Resistant to water washout.
Cons
- May attract more dirt in very dry, dusty conditions compared to dry lubes.
- Requires thorough cleaning of the chain before application for best results.
- Can be messy if over-applied.
Setup, Compatibility & Care
Setup:
- Clean the Chain: Before the first application or after a dirty ride, thoroughly clean your bicycle chain using a degreaser and brush to remove old lubricant, dirt, and grime.
- Dry the Chain: Ensure the chain is completely dry. Use a clean cloth or allow it to air dry.
- Apply Lubricant: Shake the bottle well. Apply a small amount of Silverhook Wet Chain Lube to the top of each chain roller while slowly backpedaling. Ensure each link receives lubrication.
- Wipe Excess: After application, allow the lubricant to penetrate for a few minutes. Then, use a clean, dry cloth to thoroughly wipe off any excess lubricant from the outside of the chain. This prevents dirt and grit from accumulating.
Compatibility:
This lubricant is designed for bicycle chains and is compatible with most bicycle drivetrains, including those with derailleurs and internal gear hubs. It is specifically formulated for use in wet, muddy, and humid conditions.
Care:
- Store the bottle in a cool, dry place, away from direct sunlight.
- Ensure the cap is tightly sealed after each use to prevent evaporation and contamination.
- Reapply lubricant regularly, especially after riding in wet conditions or after washing your bike, to maintain optimal performance and protection.