Shopping.co.uk

kenable Power Cord - Black

Not Availablekenable Power Cord - Black
Not Available

High Quality Fully certified for use in UK Standard Uk Plug to IEC kettle like plug. Used for powe...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This kenable 0.5m UK power cable (004533) is for users needing a reliable connection between a UK mains socket and devices with an IEC C13 (kettle lead) input, like PCs, printers, and monitors. Its key benefit is providing a safe, certified, and durable link for your equipment, with a built-in fuse for added protection. A potential caveat is its short 0.5m length, which may require an extension cord for some setups. Key features include its UK certification, 10A fused plug, durable construction, and compliance with British Standards.

All features

ColourBlack
SeriesH05VV-F
Model Part Number4533
Brandkenable

Extended Product Information

FAQs

What is the core size of this cable?

The cable features a 3x1.00mm² H05VV-F core size, providing reliable power delivery suitable for its intended applications.

Can I use this cable for a high-power appliance like a kettle?

This cable is rated for 5A (approx. 1150W at 230V), with a 10A fuse, but it is primarily designed for electronics like PCs and printers. High-power appliances typically require dedicated cables with larger core sizes and higher amperage ratings. Always check the appliance's power requirements.

Is this cable safe for use in the UK?

Yes, the cable is fully certified for use in the UK and complies with British Standards BS1363/A, including a fused UK plug for safety.

What does 'IEC C13' mean?

IEC C13 is a standard type of three-pin female connector commonly found on the power cords for computers, monitors, printers, and other electronic equipment. It's often referred to as a 'kettle lead' connector.

Can I extend this cable?

While you can connect this cable to an extension cord or power strip, we recommend using the shortest cable length necessary for your setup to maintain optimal power delivery and reduce potential signal interference.

What is the maximum wattage this cable can handle?

The cable is rated for 230-250V and 5A input current. This translates to a maximum safe operating wattage of approximately 2300W at 230V.

Troubleshooting

Device does not power on.

Check that both the UK plug and the IEC C13 connector are fully seated in their respective sockets. Ensure the wall socket is providing power by testing it with another device. Verify the device itself is functioning correctly.

Cable feels warm during use.

A slight warmth may be normal for cables under load. However, if the cable becomes excessively hot to the touch, disconnect it immediately and check the power rating of the connected device against the cable's specifications (5A/2300W). Overloading the cable can be a fire hazard.

Loose connection at either end.

Ensure the cable is the correct type for your device and that the connectors are clean. For a loose IEC C13 connection, gently check for any damage to the device's port or the cable's connector. Moulded plugs should provide a secure fit.

Pros and Cons

Pros

  • Fully certified for UK use, offering peace of mind.
  • Includes a 10A fuse for equipment protection.
  • Durable, moulded connectors and quality cable construction.
  • Compact size is good for minimizing cable mess.
  • Broad compatibility with common electronic devices.

Cons

  • Short 0.5m length may be insufficient for some installations.
  • Only rated for 5A input current, though the fuse is 10A.
  • Core size of 0.75 mm² is standard but might be perceived as less robust than thicker cables for very high-draw devices (though suitable for listed applications).

Setup, Compatibility & Care

Setup:

  1. Ensure the device you intend to power has a standard IEC C13 (kettle lead) power inlet.
  2. Plug the UK mains plug into a suitable wall socket or power strip.
  3. Connect the IEC C13 connector firmly into the power port on your device.

Compatibility:

  • Input Voltage: Designed for 230-250V AC mains power.
  • Input Current: Rated for up to 5A.
  • Maximum Wattage: Supports up to 2300W at 230V.
  • Plug Type: Standard UK 3-pin plug (Type G).
  • Connector Type: Standard IEC C13 female connector.
  • Suitable Devices: PCs, printers, monitors, desktop chargers, and other electronics with a kettle lead power input.

Care:

  • Periodically inspect the cable and connectors for any signs of damage (fraying, cracks, bent pins).
  • Avoid wrapping the cable too tightly, which can strain the wires.
  • Clean the cable and connectors with a dry or slightly damp cloth only. Do not use solvents or abrasive cleaners.
  • Ensure the cable is kept away from heat sources and areas where it could be subject to excessive pressure or crushing.