kenable Power Cable - Black

Currently unavailable

Currently unavailable
This black kenable power cable, also known as a C7 or figure 8 lead, is designed for low-power appliances like portable CD players, audio/video equipment, and some laptop power supplies. It's a reliable UK mains lead with a molded 13 Amp Plug and a 3A fuse, ideal for home or office use. While versatile for many common devices, it is not suitable for high-power equipment.
| Colour | Black |
|---|---|
| Model Part Number | 006725 |
| Brand | kenable |
A C7 power connector is a type of mains power connector often referred to as a 'figure 8' connector due to the shape of its two circular pins. It is used for low-power AC appliances.
This cable is suitable if your gaming console specifically uses a C7 (figure 8) power input. Please check your console's power port before purchasing.
The 3 Amp fuse is a safety feature designed to protect the connected device and the cable from excessive current, which could be caused by a fault or power surge. It will blow and disconnect the power if the current exceeds its rating.
No, this cable is designed for low-power devices. A standard desktop PC typically requires a C13 power cable, which is rated for higher power loads.
Look at the power input port on your device. If it has a small, rectangular socket with two side-by-side circular holes, it likely requires a C7 (figure 8) cable like this one.
RoHS (Restriction of Hazardous Substances) certification means the product complies with EU directives that restrict the use of specific hazardous materials in electrical and electronic equipment.
This cable features a UK 13 Amp plug (Type G) and is intended for use with UK power outlets only. It is not suitable for use in countries with different plug standards unless an appropriate adapter is used, ensuring voltage compatibility.
Ensure both ends of the cable are securely connected. Check that the wall socket is functioning by testing with another appliance. Verify the device's power switch is in the 'on' position.
Check for a loose connection at either the device or the wall socket. Inspect the cable for any visible damage or kinks. Try a different C7 cable if possible to rule out cable failure.
Unplug the cable immediately. This could indicate an overload on the connected device or a fault within the cable. Ensure the device's power consumption does not exceed the cable's rating (approximately 750W). If the issue persists with a different device, the cable may be faulty and should be replaced.
Setup:
Compatibility:
Care: