Neilsen Air Spray Gun - 1.8mm Nozzle Size
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for users of the Neilsen Air Spray Gun, model CT1157. It helps you understand and effectively use the spray gun for efficient paint application, offering a 1.8mm nozzle for a fine finish. Please note that this spray gun requires an air compressor and appropriate safety gear for use.
All features
| Model Part Number | CT1157 |
|---|---|
| Brand | Neilsen |
Extended Product Information
FAQs
What type of air compressor is needed?
A compressor that can supply at least 12.5cfm at 50-70psi is recommended.
What kind of paint can I use?
The spray gun is suitable for various paints, but always check the paint manufacturer's recommendations for spray application.
How do I clean the spray gun?
Disassemble the spray gun and clean all parts with appropriate solvents. Pay special attention to the nozzle.
What safety precautions should I take?
Always wear a respirator, eye protection, and gloves when spraying paint. Work in a well-ventilated area.
What is the correct spraying distance?
Maintain a distance of about 6-8 inches from the surface for optimal results. Adjust based on the paint type and the desired finish.
How often should I clean the spray gun?
Clean the spray gun immediately after each use to prevent paint from drying and clogging the nozzle.
What is the warranty?
Please refer to the product documentation or contact the manufacturer for warranty information.
Troubleshooting
Spray gun is not spraying paint.
Check the paint cup for paint, ensure the nozzle is not clogged, and verify that the air compressor is providing adequate pressure.
Uneven paint distribution.
Adjust the air pressure, check the paint viscosity, and ensure proper spray technique and distance from the surface.
Air leaks.
Check all connections for leaks and tighten if necessary. Inspect the seals and replace if damaged.
Pros and Cons
Pros
- Efficient paint application.
- Suitable for various spraying tasks.
- Easy to connect to standard air hoses.
- Durable design for long-term use.
Cons
- Requires an air compressor for operation.
- May require practice to achieve desired results.
- Cleaning and maintenance are essential for longevity.
Setup, Compatibility & Care
- Setup:
- Connect the air hose to the 1/4 inch BSP air inlet.
- Attach the air hose to a compatible air compressor.
- Fill the 1-quart capacity cup with your chosen paint.
- Compatibility:
- The spray gun is compatible with most standard air compressors.
- Use with paints and coatings suitable for spray application.
- Care:
- Clean the spray gun thoroughly after each use to prevent clogging.
- Disassemble and clean the nozzle and other components.
- Store the spray gun in a clean, dry place.