Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This guide is for homeowners looking to add a stylish and functional focal point to their kitchen. The Warren Reed Designer Pink Abstract Floral Design Kitchen Splashback offers a durable, easy-to-clean surface with a high-resolution print, enhancing both decor and practicality. A key consideration is the need for a specific adhesive for installation, as drilling is not recommended.
| Model Part Number | WR00531-P451 |
|---|---|
| Brand | Warren Reed - Designer |
You should use a clear, natural-curing adhesive. Avoid adhesives that require drilling or mechanical fixing, as these can damage the glass.
No, cutting toughened glass requires specialized equipment and techniques. It is not recommended for DIY or standard home environments, and attempting to cut it may void warranties and cause breakage.
Clean the surface with a soft, damp cloth and a mild kitchen cleaner. Rinse with water and dry with a soft, lint-free cloth. Avoid abrasive cleaners or pads.
Yes, the splashback is made from toughened glass and is heat resistant up to 400°C, making it suitable for use behind most cooktops.
The splashback is available in several standard sizes, including W600mm x H750mm, W700mm x H750mm, W900mm x H750mm, W600mm x H600mm, W600mm x H650mm, W700mm x H650mm, and W900mm x H650mm.
Yes, it is heat resistant up to 400°C. However, always ensure there is adequate ventilation and that the splashback is installed at a safe distance from the direct flame, following local safety guidelines.
Please refer to the manufacturer's warranty information provided with your purchase for details on the warranty period and coverage.
Ensure the wall is completely dry and free of dust or grease. Verify that a suitable natural-curing adhesive was used and applied evenly. Allow adequate curing time as per the adhesive manufacturer's instructions.
Clean gently with a soft, damp cloth and a non-abrasive cleaner. Avoid using scouring pads or abrasive cleaning agents. For minor surface marks, try a specialized glass polish designed for tempered glass.
This may indicate an uneven wall surface or improper adhesive application. Ensure the wall is flat before installation. If the issue persists, professional assessment may be required.
Setup: For installation, a clear, natural-curing adhesive is recommended. Ensure the wall surface is clean, dry, and smooth before applying the adhesive. Carefully align the splashback and press firmly into place. Avoid drilling into the glass, as this can cause it to shatter. Professional installation is advised for best results.
Compatibility: This splashback is designed for use on standard kitchen walls. It is compatible with most cooktops, provided it is installed at a safe distance according to local building regulations, and considering its heat resistance up to 400°C.
Care: Clean the glass surface regularly using a soft, damp cloth and a mild kitchen cleaner. Avoid abrasive pads or harsh chemicals that could scratch or damage the print. For stubborn spots, a non-abrasive glass cleaner can be used. Wipe dry with a clean, soft cloth.
