Uses air pressure from a spare wheel to bleed hydraulic brake and clutch systems. Set includes; bottle, bottle cap assembly with tyre connector, 3 x hoses, 4 x caps and 5 x seals. Suitable for one-man operation. 4 caps (25, 27, 44-45 and 46mm) 3 Hoses (3.5 x 303, 5.4 x 303 and 5.4 x 183mm) Can be used successfully on the following systems: Tandem master cylinders without sensors, Tandem reservoirs, Slave servos, Vacuum Servos. Please note: the product imagery reflects the most up to date can design, actual can received may appear slightly different until all previous cans have been sold, but both are the same reliable product. Streetwize Accessories Car Brake & Clutch Bleeder Tool Kit Eezibleed is an automatic hydraulic brake and clutch bleeder kit. This system sets the standard for affordable brake and clutch bleeding systems, using air pressure from a spare wheel it will effortlessly bleed hydraulic systems. The Eezibleed provides a simple one man solution to the labour intensive two man operation of bleeding brakes. --Suitable for a wide variety of vehicles --Uses the air pressure from a spare tyre to effortlessly bleed brake and clutch hydraulic systems Included with the kit is a range of cap and seal sizes, 25mm (Lockheed systems), 27mm (certain VAG systems), 44/45mm (Metal Girling reservoirs and ATE sys. A number of adaptors are available to fit most vehicles with screw cap reservoirs.Comprehensive instructions are included.