SolaDirect Wall Vent Kit - 100mm - 500mm Duct - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The SolaDirect 100mm Wall Vent Kit is designed for homeowners and DIY enthusiasts looking to establish a reliable, direct ventilation path for bathrooms, kitchens, and utility areas. This comprehensive kit provides a complete solution for routing airflow through exterior walls, featuring a durable rigid PVC duct and aesthetic white grilles that blend into modern interiors. While it offers excellent protection against pests and backdraughts, it is important to note that the 500mm duct length is fixed and may require cutting or extension depending on the specific thickness of your wall construction.
All features
| Model Part Number | SD-95270 |
|---|---|
| Brand | SolaDirect |
Extended Product Information
FAQs
Can this kit be used for tumble dryer venting?
This kit is designed for general ventilation. While it fits 100mm standards, ensure your appliance manufacturer approves the use of this specific grille/shutter type.
What tools are needed for installation?
You will need a power drill, a 100mm masonry core drill bit or hole saw, a screwdriver, and potentially a spirit level.
Is the insect screen removable?
Yes, the internal grille allows access to the nylon insect screen for periodic cleaning.
Does this kit include a fan?
No, this is a passive ventilation ducting kit. It does not include an active extractor fan.
Can the duct be cut to size?
Yes, the rigid PVC duct can be cut to a shorter length using a fine-tooth hacksaw if your wall is thinner than 500mm.
Is this suitable for coastal environments?
The PVC construction is resistant to rust, making it a better choice than metal grilles in damp or salt-air environments.
Troubleshooting
External shutter remains stuck or open
Check if the shutter is obstructed by debris or if the grille was installed slightly unlevel, preventing gravity from closing the flap.
Airflow is significantly restricted
Check the internal insect screen for dust buildup and ensure the duct was not compressed or crimped during the installation process.
Duct is too short for the wall thickness
You will need to source a longer 100mm rigid PVC duct of the same diameter as this kit includes a fixed 500mm length.
Pros and Cons
Pros
- Comprehensive all-in-one kit reduces the need for sourcing individual parts
- Backdraught shutter improves energy efficiency by preventing unwanted drafts
- Insect screen provides an essential barrier against pests
- Clean white finish offers a professional and unobtrusive look
- Suitable for a wide range of utility applications like laundry and bathrooms
Cons
- Duct length is fixed at 500mm, which may not suit extra-thick walls
- Not suitable for applications requiring flexible ducting
- White finish may require specific painting if matching non-standard wall colors
Setup, Compatibility & Care
Installation requires a 100mm diameter core hole drilled through the exterior wall. Use a masonry drill bit and appropriate hole saw to ensure a clean fit for the 100mm duct. Once the duct is positioned, secure the indoor and external grilles using the provided screws and wall plugs. To maintain the system, periodically remove the indoor grille to clean the nylon insect screen of any accumulated dust or lint to ensure unrestricted airflow. Inspect the external shutter once a year to ensure it is free from obstructions and pivots smoothly.