Terminal Block - TruConnect - 8 Way - 5mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This TruConnect 8-Way Terminal Block is designed for electrical engineers and DIY enthusiasts needing a reliable connection for multiple wires in a low-profile setup. Its key benefit is the secure, 90-degree horizontal mounting with an integrated wire protector for added safety and durability. A potential caveat is its specific 5mm pitch, which requires compatible spacing in your circuit design.
All features
| Model Part Number | 213984 |
|---|---|
| Brand | TruConnect |
Extended Product Information
FAQs
What is the maximum current this terminal block can handle?
This terminal block is rated for a maximum of 10A.
What does '5mm pitch' mean?
The '5mm pitch' refers to the distance between the center of one terminal connection point and the center of the next. This is a standard measurement for component spacing on circuit boards.
Can I use this for high-voltage applications?
While it provides secure connections, always ensure the voltage and current ratings of the terminal block meet or exceed the requirements of your specific application. Refer to safety guidelines for high-voltage work.
What type of wire can I use with this terminal block?
It is designed for use with stranded or solid core wires suitable for a 10A current rating. The wire gauge should be appropriate for the terminal's capacity and the screw mechanism.
Is this terminal block suitable for direct PCB soldering?
This description focuses on wire termination. If it is intended for PCB mounting, ensure it has appropriate pins or connections for soldering. Check product specifications for mounting details.
What is the 'wire protector' feature?
The wire protector is a molded part of the terminal block designed to secure the wire insulation and prevent the conductor from being damaged by the screw or external stress, ensuring a more reliable connection.
Troubleshooting
Wire not securely held
Ensure the screw is fully tightened. Check if the wire is stripped to the correct length and gauge. Verify no debris is obstructing the terminal.
Loose connection or intermittent signal
Check all screw terminals for tightness. Inspect wires for any damage at the termination point. Ensure the wire gauge is appropriate for the terminal's rating.
Terminal block does not fit mounting holes
Verify that the 5mm pitch is compatible with your existing design. This block is designed for specific spacing.
Pros and Cons
Pros
- Space-saving low-profile design.
- Secure wire protection integrated.
- Horizontal mounting is convenient for certain applications.
- Supports up to 8 wire connections.
- Durable construction for long-term use.
Cons
- Fixed 5mm pitch may not suit all applications.
- Limited to 10A current rating, check specifications for high-power needs.
- Not suitable for vertical mounting requirements.
- Wire protector may limit the gauge of wire that can be easily terminated.
Setup, Compatibility & Care
Setup: Ensure the power is disconnected before installation. Strip the wire ends to an appropriate length (refer to terminal block specifications if available, typically around 5-7mm). Insert the stripped wire into the terminal opening and securely tighten the screw. Repeat for all desired connections.
Compatibility: This terminal block features a 5mm pitch, meaning the distance between the center of one terminal and the center of the next is 5mm. It is designed for wire sizes compatible with a 10A current rating. Verify that your PCB or mounting surface has corresponding mounting holes if required, and that the wire gauge is suitable for the terminal's capacity.
Care: Clean with a dry or slightly damp cloth. Avoid using solvents or abrasive cleaners. Ensure connections remain clean and free from dust or debris to maintain optimal performance.