Bosch Series 4 - Black


Currently unavailable


Currently unavailable
This guide is for anyone looking to understand and effectively use the Bosch Series 4 induction hob. The key benefit of this hob is its integrated ventilation system, eliminating the need for a separate hood and saving space. However, it requires professional installation due to its hard-wired connection. This guide covers key features, performance, setup, and troubleshooting to help you make the most of your new hob.
| Colour | Black |
|---|---|
| Energy Efficiency | B |
| Model Part Number | PVS611B16E |
| Brand | Bosch |
Wipe the surface with a soft, damp cloth and a suitable hob cleaner after each use. Avoid abrasive cleaners or scouring pads.
Use induction-compatible cookware with a flat base. A magnet should stick to the bottom of the cookware. Stainless steel and cast iron are usually compatible.
Select the desired cooking zone and press the PowerBoost button. The hob will automatically increase the power for faster heating. Note that the PowerBoost function is only available on certain zones.
Select the two cooking zones you want to combine, and activate the CombiZone function by pressing the designated button on the control panel.
If you accidentally switch off the hob, you can turn it back on within four seconds, and the hob will restore the previous settings.
The ventilation can be set up for either ducted or recirculating extraction, depending on your kitchen setup.
The carbon filter should be replaced according to the manufacturer's instructions. The frequency will depend on usage, but typically every 6-12 months.
The hob has an energy efficiency class of B.
Check the power supply and circuit breaker. Ensure the hob is properly connected and that the power supply is functioning. Contact a qualified electrician if the problem persists.
Make sure you are using induction-compatible cookware. Check the power level settings and ensure the correct cooking zone is selected. Check for any obstructions in the ventilation system.
Check the power supply to the hob. Make sure the fan speed is correctly selected. Check if the grease filter is clogged and needs replacing. Inspect the fan for any blockages.
Clean the control panel. Ensure your fingers are dry when operating the controls. Try restarting the hob.