Cascamite DMPT Free Mitre Bond Kit - 250ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Cascamite DMPT Free Mitre Bond Kit is designed for professionals and DIY enthusiasts needing a rapid and strong bond for a variety of materials. Its key benefit is a fast-curing adhesive system that allows for quick assembly and repair, though users should be aware of its strong fumes and potential for skin bonding. This kit includes a high-viscosity cyanoacrylate adhesive and an activator, ideal for bonding plastics, rubbers, timber, metal, fabrics, ceramics, leather, and difficult polymers.
All features
| Model Part Number | H080043CAS |
|---|---|
| Brand | Cascamite |
Extended Product Information
FAQs
What is the main advantage of this DMPT-free kit?
The DMPT-free formulation aims to reduce potential sensitivity issues associated with traditional cyanoacrylate activators, while still providing a fast and strong bond.
How long does it take for the bond to fully cure?
The bond sets within seconds, allowing for immediate handling. Full cure, achieving maximum strength, typically occurs within 24 hours, though this can vary depending on material and environmental conditions.
Can I use this on flexible materials like rubber or fabric?
Yes, the kit is designed to bond a wide range of materials including rubber and fabrics. For fabrics, a strong bond will be achieved, but the area may become stiff.
What should I do if I get the adhesive on my skin?
Avoid pulling the skin apart. Soak the affected area in warm, soapy water and gently try to peel or roll the skin apart. Acetone can help dissolve the adhesive, but use it cautiously on skin.
Is the activator safe to inhale?
The activator has strong fumes and should be used in a well-ventilated area. Avoid prolonged inhalation. Wear appropriate respiratory protection if necessary.
Can this kit bond 'difficult polymers'?
Yes, the product description specifically mentions compatibility with 'difficult polymers', which often require specialized adhesives for effective bonding.
How should I store the kit?
Store in a cool, dry place, away from heat and direct sunlight, with containers tightly sealed.
Troubleshooting
Adhesive does not cure quickly
Ensure both surfaces are clean and dry. Verify that the activator is being applied correctly and in sufficient quantity. Check the expiry date of the products; old adhesive or activator may be less effective.
Bond is weak or fails
The surfaces may not have been properly prepared (e.g., dirty, oily, or not making full contact). Ensure adequate pressure was applied during the bonding process. The materials being bonded might be incompatible or have a surface that the adhesive cannot adhere to effectively.
Adhesive runs or drips
Apply the adhesive more sparingly. For vertical surfaces, apply adhesive to only one surface and hold in place for longer without activator, or use a gel-type cyanoacrylate if available for better vertical adhesion.
White residue (blooming) around bond line
This occurs when excess adhesive vaporizes and re-solidifies. Apply adhesive and activator more sparingly. Ensure good ventilation. The residue can sometimes be removed with a solvent like acetone (test first).
Accidental bonding of skin
Do NOT pull bonded skin apart. Soak the bonded area in warm, soapy water. Gently peel or roll the skin apart using a blunt object like a spoon handle. Acetone (nail polish remover) can help dissolve cyanoacrylate but use with caution on skin.
Pros and Cons
Pros
- Extremely fast bonding time
- Works on a diverse range of materials
- High viscosity prevents drips and allows for gap filling
- DMPT-free formulation
- Creates very strong and durable bonds
Cons
- Can bond skin instantly
- Activator can have strong fumes
- Requires careful application to avoid accidental bonding
- Not suitable for all flexible plastics
- May leave a white residue if too much activator is used
Setup, Compatibility & Care
Setup:
- Ensure surfaces to be bonded are clean, dry, and free from grease or dust.
- Apply the high-viscosity adhesive to one surface.
- For rapid curing, spray a light mist of the activator onto the other surface or into the air near the bond line.
- Immediately press the two surfaces together firmly and hold for several seconds until the bond sets.
Compatibility: This kit is compatible with a wide array of materials including, but not limited to:
- Plastics (including difficult polymers)
- Rubber
- Timber
- Metal components
- Fabrics
- Ceramics
- Leather
Care:
- Store the adhesive and activator in a cool, dry place away from direct sunlight and heat.
- Keep containers tightly sealed when not in use.
- Avoid contact with skin and eyes. Wear appropriate protective gloves and eye protection during use.
- Ensure good ventilation when using the activator.
- Clean up any excess adhesive or residue promptly with a suitable solvent (test in an inconspicuous area first) or by carefully peeling once fully cured.