Shopping.co.uk

Narwal Freo X Ultra Robotic Mop And Vacuum Cleaner - White

Not AvailableNarwal Freo X Ultra Robotic Mop And Vacuum Cleaner - White
Not Available

Höhepunkte: 8.200 Pa Saugkraft: Mit einer Saugleistung von 8.200 Pa wird Schmutz von Hartböden, Te...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

The Narwal Freo X Ultra is an advanced robotic vacuum and mop designed for busy households seeking a hands-free cleaning solution. Its key benefit is a powerful 8200 Pa suction combined with intelligent DirtSense technology that ensures spotless floors, while its main caveat is the premium price point. This all-in-one system features an all-in-one base station for automatic mop washing, drying, and dust disposal, a certified zero-tangle brush ideal for pet owners, and precise Tri-Laser navigation for efficient cleaning.

All features

ColourWhite
SeriesFreo X Ultra
Model Part Number6972075732565
BrandNarwal

Extended Product Information

FAQs

How often do I need to empty the dust bag?

The Freo X Ultra's dust compression technology allows for up to 7 weeks of dust storage. You will be notified via the app when it's time to replace the dust bag.

Can the Freo X Ultra clean carpets?

Yes, it can vacuum carpets effectively. It also features a function to automatically lift its mop pads by 12mm when it detects a carpet, preventing it from getting wet during vacuum-only cycles.

How does the 'DirtSense' technology work?

DirtSense uses sensors to monitor the dirt level in the wastewater. If the floor isn't perfectly clean, the robot will automatically return to clean the area again until it meets the required standard.

What maintenance is required for the mop pads?

The all-in-one base station automatically washes, dries (at 40°C/104°F), and cleans the mop pads after each use, significantly reducing manual maintenance and preventing odors and bacteria.

Can I use my own cleaning solution?

The Freo X Ultra is designed to use its own approved cleaning solution, dispensed automatically by the base station. Using third-party solutions may affect performance and void the warranty.

Is the robot noisy?

The Freo X Ultra is designed with quiet operation in mind, with noise levels low enough not to be disruptive, allowing it to clean even while you sleep.

Does it support multi-floor cleaning?

Yes, the Freo X Ultra supports multi-floor mapping, allowing you to save different maps for different levels of your home.

Troubleshooting

Robot not returning to base station

Ensure the base station is powered on and within range. Check for obstructions blocking the robot's path to the station. Clean the charging contacts on both the robot and the base station.

Poor suction performance

Check if the dust bag in the base station is full and needs emptying. Inspect the robot's dustbin, filters, and brush for clogs or debris and clean as necessary. Ensure the robot is not on a thick carpet that is impeding suction.

Mop pads not cleaning effectively

Verify that the base station is adequately supplied with clean water and detergent. Ensure the mop pads are correctly attached and not overly worn. Check app settings to confirm mop wetness is appropriately adjusted.

Robot is getting stuck or lost

Clear the cleaning area of any small or low-lying objects that the Tri-Laser system might not detect. Ensure the room has adequate lighting for navigation. Re-map the area via the app if the environment has changed significantly.

Unusual noises during operation

Inspect the main brush and side brushes for tangled hair or debris. Check the robot's wheels and the base station's mechanisms for any foreign objects.

Pros and Cons

Pros

  • Exceptional suction power for deep cleaning.
  • Intelligent dirt detection ensures thoroughly cleaned floors.
  • All-in-one base station significantly reduces manual maintenance.
  • Zero-tangle brush is a major advantage for pet owners.
  • Advanced navigation and obstacle avoidance for efficient operation.

Cons

  • Higher initial investment compared to basic robot vacuums.
  • The base station requires significant space.
  • Some advanced features may require app configuration.

Setup, Compatibility & Care

Setup:

  1. Unpack the robot vacuum and the all-in-one base station.
  2. Connect the base station to a power source.
  3. Install the dust bag and fill the clean water tank if necessary.
  4. Download the Narwal app and follow the on-screen instructions to connect the robot to your Wi-Fi network and create a map of your home.
  5. Place the robot on the base station to initiate charging and complete setup.

Compatibility:

  • Works with Wi-Fi networks (2.4GHz).
  • Compatible with Google Assistant, Alexa, and Siri for voice control.
  • Supports multi-floor mapping.

Care:

  • Base Station: Empty the dust bag every 7 weeks or when prompted by the app. Refill the clean water tank and empty the dirty water tank as needed. The base station has an automatic cleaning function for the mop pads and itself.
  • Robot: Regularly check and clean the main brush and side brushes for any debris. Wipe down the sensors with a dry, soft cloth to ensure optimal navigation. Clean the dustbin and filters within the robot itself if needed, though the base station handles most dust collection.
  • Mop Pads: The base station automatically washes and dries the mop pads. Ensure the detergent dispenser is filled with compatible cleaning solution.