Rust-Oleum Radiator Paint - Empire Red - Matt Finish
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for homeowners and DIY enthusiasts looking to refresh their radiators with a durable, heat-resistant paint. The Rust-Oleum Radiator Paint in Empire Red offers exceptional coverage and a beautiful matt finish, allowing you to easily transform your radiators. Keep in mind that for best results, two coats are recommended, and when spraying, the paint should be diluted with water.
All features
| Colour | Red |
|---|---|
| Model Part Number | SHDRCT1138 |
| Brand | Rust-Oleum |
Extended Product Information
FAQs
How much paint do I need?
One 750ml tin covers up to 14m².
Can I use this paint on any other surfaces?
It is designed specifically for radiators and should not be used on other surfaces unless they are heat resistant.
How long does it take for the paint to dry?
Drying times will vary depending on conditions. Refer to the product label for specific details.
What is the best way to clean the application tools?
Clean brushes and rollers immediately with water.
How many coats of paint are needed?
Two coats are recommended for the best coverage and finish.
What if I don't like the colour?
Test the colour first using a tester sachet before applying to the entire surface.
Troubleshooting
Paint is not adhering properly.
Ensure the surface is clean, dry, and properly prepared. Lightly sand the surface and consider using a primer for bare metal.
Paint is running or dripping.
Apply thinner coats and avoid overloading the brush or roller. If spraying, reduce the paint flow.
Uneven finish.
Ensure thorough stirring and even application. Apply two thin coats rather than one thick coat.
Pros and Cons
Pros
- Provides a beautiful matt finish.
- Heat resistant formula.
- Easy to apply with various methods.
- Offers long-lasting coverage.
- Available in a wide range of colours.
Cons
- Requires two coats for optimal results.
- Needs dilution with water when spraying.
- Test patches are recommended before applying to the entire surface.
Setup, Compatibility & Care
- Preparation:
- Ensure the radiator is clean, dry, and free from rust or loose paint.
- Lightly sand previously painted surfaces to create a key.
- Prime bare metal surfaces.
- Application:
- Stir the paint thoroughly before use.
- Apply the paint using a brush, roller, or electric sprayer.
- If spraying, dilute with water by 10-20% as required.
- Apply two coats, allowing sufficient drying time between coats.
- Compatibility:
- Suitable for use on previously primed or painted radiators.
- Not suitable for use on surfaces exposed to extreme heat or direct flame.
- Care:
- Clean up spills immediately with water.
- Avoid using abrasive cleaners on the painted surface.
- Regularly dust the radiator to keep it clean.