Rubio Monocoat Wood Stain & Finish - Smoke - Grey
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Rubio Monocoat Oil Plus 2C is designed for DIYers and professionals seeking an efficient, durable, and eco-friendly way to color and protect interior wood surfaces. Its key benefit is a single-layer application that drastically speeds up the finishing process while providing robust protection. A minor caveat is that color results can vary based on wood type, so testing on a sample is recommended.
All features
| Colour | Grey |
|---|---|
| Brand | Rubio Monocoat |
Extended Product Information
FAQs
How long does it take for Rubio Monocoat Oil Plus 2C to cure?
The surface is usually walk-on ready after 24 hours and fully cured after 7 days. However, it can be recoated or used for daily activities much sooner, typically within 48 hours, depending on conditions.
Can I use Rubio Monocoat Oil Plus 2C on pre-finished wood?
It is generally recommended for bare wood or wood that has been stripped back to its natural state. Applying over certain pre-finished surfaces may not yield optimal adhesion or results. Always test on a small, inconspicuous area first.
What is the coverage rate of Oil Plus 2C?
The coverage is approximately 1 m² per 10-15 ml for a single coat, meaning one liter can cover about 70-100 m². This can vary depending on the wood's porosity and the application method.
Is this product suitable for cutting boards or food preparation surfaces?
Yes, Rubio Monocoat Oil Plus 2C is certified for food contact and is safe to use on kitchen worktops and cutting boards. Ensure it is fully cured before contact with food.
How many colors are available?
Rubio Monocoat offers a wide range of over 40 colors, allowing for extensive customization to match various interior design styles.
Do I need to sand between coats?
No, the unique single-coat application means no sanding is required between coats. If a second coat is applied for specific reasons, light buffing might be done, but no sanding is necessary.
Can I repair a damaged area later?
Yes, one of the advantages of Oil Plus 2C is its spot-repairability. You can reapply the oil to a specific damaged area without visible overlap marks, making repairs seamless.
Troubleshooting
Streaky or uneven finish after application
This often occurs if excess oil is not removed properly. Ensure all excess product is wiped off thoroughly within the recommended time frame. Apply a small amount of maintenance oil and buff again to even out the appearance.
Wood appears darker or blotchy than expected
Color results depend heavily on the wood type. Test the color on an inconspicuous area or a sample piece of the same wood first. If blotchiness occurs on porous woods, consider applying a pre-treatment or a second, very thin maintenance coat after full curing.
Product does not seem to dry or cure properly
Ensure the A and B parts were mixed in the correct ratio (3:1). Verify that the product was applied in a well-ventilated area within the recommended temperature range. Improper mixing or application conditions can affect curing.
Wood feels slightly tacky after curing
This usually means excess oil was left on the surface. Buff the area again with a clean, lint-free cloth. If tackiness persists after a few days, a very light application of maintenance oil and buffing may help.
Pros and Cons
Pros
- Single-coat application saves significant time and labor.
- Provides excellent durability and resistance to daily wear, water, and heat.
- Eco-friendly with zero VOCs, contributing to healthier indoor air quality.
- Wide range of colors available to match diverse design preferences.
- Safe for use on children's toys and kitchen surfaces.
- Suitable for all interior wood types.
Cons
- Color results can vary depending on the specific wood species and its natural color.
- Requires a specific application technique to avoid issues like overlaps.
- The initial cost might be higher compared to traditional varnishes.
- Dedicated maintenance products are recommended for longevity.
- Not suitable for exterior applications.
- Requires thorough surface preparation for optimal results.
Setup, Compatibility & Care
Setup:
- Ensure the wood surface is clean, dry, and free from dust, grease, and old finishes. Sanding may be required for bare wood or to achieve a smooth surface.
- Mix Part A (Oil Plus 2C) and Part B (Accelerator) in a 3:1 ratio in a clean container. Stir thoroughly for 30 seconds to activate the bonding process.
- Apply the mixture evenly to the wood using a lint-free cloth, applicator pad, or brush. Work in manageable sections.
- Allow the oil to penetrate for a few minutes (refer to product specifics).
- Remove any excess oil with a clean, lint-free cloth or buffer pad, moving in the direction of the wood grain. Buff until the surface is dry to the touch.
Compatibility:
- Compatible with all interior wood types, including hardwoods and softwoods.
- Can be applied over existing stains, provided they are compatible and the surface is clean.
- Not suitable for exterior applications or surfaces exposed to constant moisture.
Care:
- Clean spills immediately with a damp cloth.
- For regular cleaning, use a recommended wood cleaner like Rubio Monocoat's Soap.
- Avoid abrasive cleaners or excessive water.
- For maintenance or to refresh the finish on high-wear areas, a maintenance oil or a single re-coat of Oil Plus 2C can be applied following the initial application steps.