Liberon Verdigris Wax - 250ml
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to create unique, aged effects on various surfaces using Liberon Verdigris Wax. The wax is ideal for adding green hues, emulating the look of aged copper and brass. Note that achieving the desired effect might require some practice and experimentation on different materials.
All features
| Model Part Number | A05B1057 |
|---|---|
| Brand | Liberon |
Extended Product Information
FAQs
What surfaces can I use this wax on?
You can use Liberon Verdigris Wax on wood, metal, stone, plastic, and plaster.
How long does it take to dry?
The wax dries in approximately 5 minutes.
How do I apply the wax?
Apply a thin coat with ultra-fine steel wool or a clean, lint-free cloth.
Can I use this wax on bare wood?
Yes, it is suitable for use on bare or coloured wood.
How can I thin the wax?
You can thin the wax with a small amount of white spirit.
How much area will 250ml of wax cover?
Coverage is approximately 8-12m².
Can I seal the wax?
Yes, once dry, you can seal it with White Polish.
How do I remove the wax?
Use Black Bison, Wax Neutral, or Finishing Oil on a lint-free cloth or steel wool.
Troubleshooting
Uneven application or blotchy finish.
Ensure a thin, even coat of wax is applied. Use a clean cloth or steel wool and apply with consistent pressure.
Color is not as expected.
Test on a hidden area first. The color may vary slightly based on the surface material and the amount of wax applied.
Difficulty removing the wax.
Use Black Bison, Wax Neutral, or Finishing Oil on a lint-free cloth or steel wool to remove the wax.
Pros and Cons
Pros
- Creates unique and striking visual effects.
- Suitable for a wide variety of materials.
- Easy to apply using common tools.
- Can be used for both decorative and protective purposes.
- Allows for creative and artistic expression.
Cons
- Requires practice to achieve desired effects.
- Color may vary slightly depending on the surface.
- Removal of large areas requires specific products.
- Drying time is relatively short, requiring quick work.
- Effect may not be suitable for all applications.
Setup, Compatibility & Care
Setup: Ensure the surface is clean, dry, and free from any existing finishes before application.
Application:
- Apply a thin coat with ultra-fine steel wool for a colored finish on bare wood and buff.
- For other surfaces, use a clean, lint-free cloth to apply the wax.
- Thin with a small amount of white spirit for easier application on bare timber, if needed.
Compatibility: Works best on interior surfaces.
Care: Once dry, seal with White Polish to protect the finish. To remove the wax, use Black Bison, Wax Neutral, or Finishing Oil on a lint-free cloth or steel wool.