Safetots Diagonal Fit Baby Gate - White Metal - 67Cm - 105.5Cm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Safetots Diagonal Fit Baby Gate is designed for parents needing a secure barrier in non-standard or challenging spaces, such as the bottom of stairs or awkward doorways where traditional gates won't fit. Its key benefit is the unique diagonal fitting system that allows installation without directly opposite fixing points, offering flexibility up to 105.5cm. A minor consideration is its manual closing mechanism, which requires an intentional action to secure after passing through. This hardware-mounted gate provides a robust, trip-free solution with a wide walkthrough, ensuring safety and convenience for busy households.
All features
| Model Part Number | 5612 |
|---|---|
| Brand | Safetots |
Extended Product Information
FAQs
Can this gate be used at the top of stairs?
Yes, this is a hardware-mounted gate and is rigorously tested to the EN1930:2011 safety standard, making it suitable and recommended for use at the top of stairs.
What is the maximum width this gate can cover?
The gate can be fitted in openings ranging from 67cm up to a maximum of 105.5cm.
Do I need tools to install this gate?
Yes, as this is a hardware-mounted gate, you will need tools for drilling and installation, such as a drill, appropriate drill bits, and a screwdriver.
Is there a bar at the bottom of the gate?
No, this gate features a 'no frame' design, meaning there is no bottom bar, which eliminates the trip hazard.
How does the diagonal fitting system work?
The fittings rotate 180 degrees, allowing you to mount the gate securely even when the wall surfaces are not directly opposite each other, such as on angled walls or in specific architectural layouts.
What is the height of the gate?
The installed height of the Safetots Diagonal Fit Baby Gate is 73cm.
What is the warranty period for this gate?
The gate comes with a 1-year guarantee.
Troubleshooting
Gate does not close securely
Check that the gate is properly aligned within its fittings. Ensure the locking mechanism is fully engaged. Verify that the installation points are stable and haven't shifted.
Fittings feel loose after installation
Re-tighten the screws securing the rotating fittings to the wall. Ensure you are using appropriate wall anchors if mounting into drywall. If mounting to wood, ensure screws are long enough to provide a strong hold.
Gate is difficult to open or close
Inspect the hinges and locking mechanism for any obstructions. Clean and lubricate if necessary (use a silicone-based lubricant sparingly). Ensure the gate is installed straight and not at an angle that causes binding.
The gap between the gate and the frame is too wide
Adjust the position of the gate within the rotating fittings. Ensure the gate is centered and the gap is consistent on both sides for optimal locking.
Pros and Cons
Pros
- Flexible installation in unusual spaces thanks to the diagonal fitting.
- Secure hardware mounting is ideal for high-risk areas like staircases.
- Trip-free design with no bottom bar enhances safety.
- Wide walkthrough space for easy passage.
- Robust double locking mechanism for added security.
Cons
- Manual closing system requires conscious effort to latch.
- Requires drilling for installation, making it less portable than pressure-fit gates.
- Height of 73cm might be surpassed by older or determined toddlers.
- White metal finish may show scuffs over time with heavy use.
Setup, Compatibility & Care
Setup:
- Identify Installation Location: Determine the desired placement for the gate, ensuring it spans between 67cm and 105.5cm. Note that this is a hardware-mounted gate, requiring drilling into walls or secure fixtures.
- Attach Fittings: Mount the rotating fittings to the chosen surfaces using the provided hardware. Ensure they are securely fastened and level.
- Mount Gate: Hang the gate onto the attached fittings. Adjust the gate within the fittings to ensure it is straight and sits flush.
- Adjust and Test: Secure the gate using the locking mechanism. Test the opening and closing action multiple times to ensure smooth operation and a secure latch.
Compatibility:
- Width: Suitable for openings from 67cm to 105.5cm.
- Mounting Surface: Requires solid walls or sturdy fixtures for secure hardware mounting. Not suitable for mounting solely on drywall without appropriate anchors.
- Location: Ideal for doorways, hallways, and stair bases (both top and bottom).
Care:
- Clean the gate with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- Periodically check that the mounting hardware remains secure and the locking mechanism is functioning correctly. Tighten any loose screws as needed.
- Ensure the gate is dry after cleaning to prevent rust or damage to metal components.