Cuprinol Decking Oil - Natural - 5L
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for homeowners and DIY enthusiasts looking to protect and revitalize their wooden decking. Cuprinol UV Guard Decking Oil penetrates wood, replacing lost natural oils and resins, while providing a lightly tinted finish to enhance the wood's natural colour. This water-based oil is easy to apply with a brush or sprayer, offering weather protection. However, ensure the decking is suitable for oil-based treatments before application.
All features
| Colour | Brown |
|---|---|
| Model Part Number | 5122414 |
| Brand | Cuprinol |
Extended Product Information
FAQs
How much area does one can cover?
On average, one litre covers up to 8 m².
How long should I wait between coats?
Allow approximately 6 hours between coats, dependent on weather conditions.
Can I use this oil on previously painted decking?
No, it is only suitable for bare or previously oiled decking.
What tools do I need for application?
A brush or a Cuprinol sprayer.
How do I clean the tools after use?
Clean tools with water immediately after use.
Is this oil suitable for indoor use?
No, it is not suitable for indoor use.
How should I store the oil?
Store in a cool, dry place and avoid extreme temperatures.
What is the composition of the oil?
The oil is water-based.
Troubleshooting
Oil is not penetrating the wood.
Ensure the surface is properly prepared, remove any existing coatings and ensure the wood is clean and dry. Apply the oil thinly and evenly.
Uneven finish after application.
Ensure even application, and avoid creating puddles. Lightly sand the surface before applying a second coat.
Oil takes longer than 6 hours to dry.
Check the weather conditions; high humidity or low temperatures can slow drying. Ensure adequate ventilation.
Pros and Cons
Pros
- Revitalizes the colour of weathered wood.
- Easy application with brush or sprayer.
- Water-based formula for easy cleanup.
- Protects against weather damage.
- Provides a lightly tinted finish.
Cons
- Requires two coats for optimal protection.
- Drying time of approximately 6 hours.
- Only suitable for bare or previously oiled decking.
- Coverage is dependent on the wood type and condition.
- Not suitable for indoor use.
Setup, Compatibility & Care
- Surface Preparation: Ensure the decking is clean and dry. Remove any existing coatings, dirt, algae, or moss. Use a scraper or stiff brush to clean the surface.
- Application: Shake the can well before and during use. Apply the oil evenly along the grain using a brush or sprayer. Avoid creating puddles.
- Number of Coats: Apply two coats for the best results, allowing the first coat to penetrate the wood before applying the second.
- Drying Time: Allow approximately 6 hours of drying time between coats, dependent on weather conditions.
- Tool Cleaning: Clean brushes and sprayers with water immediately after use.
- Storage: Store in a cool, dry place. Do not store or use in extreme temperatures.