Wood Glue Adhesive - Brown
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using Bond It PU Rapid Wood Adhesive for bonding various materials. The primary benefit is its fast-setting and water-resistant properties, allowing for quick and durable bonds. However, it's crucial to ensure proper surface preparation for optimal adhesion. This adhesive is ideal for joinery, carpentry, and various construction projects.
All features
| Colour | Brown |
|---|---|
| Model Part Number | BDAPU375 |
| Brand | Bond it |
Extended Product Information
FAQs
What is the shelf life of Bond It PU Rapid Wood Adhesive?
The shelf life is typically 12 months from the date of manufacture when stored in the original unopened container in a cool, dry place.
Can I use this adhesive outdoors?
Yes, it is suitable for outdoor use due to its D4 water resistance classification.
What is the working time of this adhesive?
The working time is usually a few minutes, depending on the conditions (temperature and humidity).
How do I clean up the adhesive?
Uncured adhesive can be cleaned up with a suitable solvent. Cured adhesive is difficult to remove.
What is the recommended clamping time?
The clamping time depends on the specific application and the materials being bonded. Refer to the product data sheet for specific guidance.
Is Bond It PU Rapid Wood Adhesive solvent-free?
Yes, it is a solvent-free adhesive, making it more environmentally friendly.
Can I use this adhesive on metal?
Yes, this adhesive bonds well with metal, as well as wood, plastics and other materials.
Troubleshooting
Adhesion Failure
Ensure surfaces are properly prepared (clean, dry, and free from contaminants). Consider abrading smooth surfaces to improve adhesion. Check the expiry date of the adhesive.
Slow Setting Time
Ensure the temperature and humidity are within the recommended range. Check that the surfaces have adequate moisture. Ensure the adhesive hasn't expired.
Incomplete Curing
Ensure sufficient ventilation and that the adhesive hasn't been applied too thickly. Allow the adhesive to cure for the recommended time, and ensure appropriate temperature and humidity levels.
Pros and Cons
Pros
- Fast curing time
- Excellent water resistance (D4)
- Bonds to a wide range of materials
- Solvent-free formulation
- Flexible bond that withstands movement
Cons
- Requires proper surface preparation for optimal adhesion
- May require clamping during the initial setting phase, depending on the application
- Potentially shorter open time compared to slower-setting adhesives
- Once cured, it's difficult to remove
Setup, Compatibility & Care
Setup
- Surface Preparation: Ensure surfaces are clean, dry, and free from dust, grease, or any other contaminants. Lightly abrading smooth surfaces can improve adhesion.
- Application: Apply the adhesive evenly to one or both surfaces, depending on the application. A toothed spreader can assist with even distribution.
- Clamping: Depending on the materials and application, clamping may be required to maintain pressure during the initial setting phase. Follow the manufacturer's recommendations for clamping time and pressure.
- Curing: Allow the adhesive to cure completely according to the manufacturer's instructions. Curing time is influenced by temperature and humidity.
Compatibility
Bond It PU Rapid Wood Adhesive is compatible with wood, chipboard, laminate, metals, polyurethane, expanded and extruded polystyrene foams, mineral wool, concrete, stone, bricks, gypsum boards, and all traditional porous substrates.
Care
- Storage: Store in a cool, dry place, away from direct sunlight, and heat sources.
- Cleanup: Remove any uncured adhesive with a suitable solvent. Once cured, the adhesive is difficult to remove.
- Safety: Always wear appropriate personal protective equipment (PPE), such as gloves and eye protection, during application. Ensure adequate ventilation in the work area.