Laser Tools Brake & Clutch Pressure Bleed Kit - 9315
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Laser Tools Brake & Clutch Pressure Bleed Kit (9315) is designed for automotive professionals and DIY enthusiasts seeking a portable and efficient solution for bleeding brake and clutch systems. Its key benefit lies in its versatility, drawing fluid directly from bottles and offering multiple power options for maximum flexibility. A potential consideration is the need for specific adaptors for certain vehicle types, though a comprehensive set is included.
All features
| Model Part Number | 9315 |
|---|---|
| Brand | Laser Tools |
Extended Product Information
FAQs
What types of brake fluid can I use with this kit?
This kit is safe for use with DOT 3, DOT 4, DOT 4+, and DOT 5.1 brake fluids.
Can I use this kit on American vehicles?
The kit includes 16 adaptors primarily for European and Japanese vehicles. Compatibility with American vehicles may require specific Laser Tools master cylinder adaptor caps.
How do I clean the unit after use?
After use, flush the internal lines with clean brake fluid or isopropyl alcohol. Wipe the exterior with a damp cloth. Avoid harsh solvents.
What is the maximum pressure the kit can deliver?
The kit allows for easily adjustable pressure from 0 to 50 psi (3.5 bar).
How many wheels can be bled at once?
The kit includes two fluid bleed bottles, allowing for the simultaneous bleeding of two wheels.
What are the power options for this bleed kit?
It can be powered by a 230V mains supply, a 12V vehicle supply using alligator clips, or its detachable 21V rechargeable battery.
Does the kit automatically stop when empty?
Yes, the unit has an auto shut-off feature that activates when the fluid reservoir is empty to prevent air from entering the system.
Troubleshooting
Unit not powering on
Ensure the battery is charged and properly connected, or check the 12V or 230V power connections.
Low or no fluid pressure
Verify the fluid reservoir is filled, check for air leaks at connections, and ensure the pressure is set correctly.
Fluid leaking from adaptor connection
Ensure the correct adaptor is used and securely fitted. Check the adaptor and bleed nipple for damage.
Bleeding process seems slow
Confirm the pressure is adequate for the system. Ensure both bleed bottles are properly connected and not blocked.
Pros and Cons
Pros
- Highly portable with multiple power options (mains, 12V, battery).
- Adjustable pressure allows for precise control during bleeding.
- Dual bleed bottles speed up the process.
- Includes a large set of adaptors for broad vehicle coverage.
- Auto shut-off prevents accidental air introduction.
- Draws fluid directly from bottles for convenience.
Cons
- Requires purchasing separate Laser Tools master cylinder adaptor caps for some specific applications.
- 12V and mains power require a connected source during operation if battery is depleted.
- Rechargeable battery requires initial charging time.
- Pressure setting needs careful attention to avoid system damage.
Setup, Compatibility & Care
Setup:
- Connect the appropriate power source: 230V mains cable, 12V alligator clips, or ensure the 21V rechargeable battery is charged and attached.
- Fill the internal reservoir with the correct brake fluid (DOT 3, 4, 4+, or 5.1).
- Select the appropriate brake cylinder adaptor from the 16 included and attach it to the vehicle's bleed nipple.
- Connect the quick coupling from the bleed kit to the adaptor.
- Adjust the pressure setting to the desired level (0-50 psi).
Compatibility:
- Compatible with DOT 3, DOT 4, DOT 4+, and DOT 5.1 brake fluids.
- Includes 16 adaptors for European and Japanese vehicles. For specific master cylinder cap fittings, check compatibility with Laser Tools master cylinder adaptor caps.
Care:
- After each use, flush the system with clean brake fluid or isopropyl alcohol to prevent contamination.
- Wipe down the unit with a clean, damp cloth. Avoid using solvents.
- Store the kit in a clean, dry environment, ensuring all components are secure.
- Charge the rechargeable battery regularly, even if not in frequent use.