Frenchic Wall Paint - Emerald Isle
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Frenchic Wall Paint in Emerald Isle is designed for DIY enthusiasts and homeowners seeking a durable, easy-to-use, and eco-friendly paint for interior surfaces. Its key benefit is the all-in-one functionality, acting as primer, paint, and sealer, saving time and effort. A potential caveat is the ultra-matte finish, which may show scuffs more readily than satin or gloss finishes, requiring careful cleaning. This washable, breathable, chalk and mineral paint offers excellent coverage and an ultra-matte finish, suitable for walls, ceilings, and various other interior surfaces.
All features
| Colour | Green |
|---|---|
| Model Part Number | 39983679864919 |
| Brand | Frenchic |
Extended Product Information
FAQs
Do I need a primer or top coat with this paint?
No, this paint is formulated to be self-priming and self-sealing, meaning no separate primer or top coat is required.
How many coats of paint should I apply?
While one coat provides coverage, two coats are recommended for optimal depth of colour and enhanced durability.
What is the coverage rate of the paint?
A 2.5L tin covers approximately 35m² with a single coat. Two coats will cover around 17.5m².
Is this paint suitable for bathrooms or kitchens?
It is suitable for kitchen cupboards and interior walls/ceilings. It is not recommended for very wet areas like shower enclosures or bath surrounds.
How do I clean the painted surface?
Once cured, the paint is washable and scrubbable. Use a soft, damp cloth. For stubborn marks, a mild detergent solution can be used gently.
Can this paint be used on children's toys?
Yes, the paint is EN71-3 certified, making it safe for use on children's toys.
What kind of finish does this paint have?
It has an ultra-matte finish, which is non-reflective and provides a sophisticated look.
Troubleshooting
Paint appears streaky or uneven.
Ensure paint is well-stirred and applied evenly with a good quality brush or roller. Check for adequate paint load on the applicator and maintain a wet edge during application.
Surface feels tacky after extended drying time.
This may indicate insufficient drying conditions (low temperature, high humidity) or that the surface is not fully cured. Ensure the room is well-ventilated and allow more time. Avoid heavy use until fully cured.
Paint is not adhering well to the surface.
The surface may not have been properly prepared. Ensure it is clean, dry, and free from contaminants like grease or dust. Lightly abrading non-porous surfaces might be necessary.
Marks are difficult to remove from the dried paint film.
While scrubbable, the ultra-matte finish requires gentle cleaning. Use a soft, damp cloth first. If necessary, use a mild detergent solution, testing in an inconspicuous area. Avoid excessive rubbing or abrasive cleaners.
Pros and Cons
Pros
- Simplifies the painting process with its self-priming and self-sealing properties.
- Highly durable and easy to maintain due to its scrubbable finish.
- Safe for use in homes with children and pets.
- Environmentally conscious with low VOCs and minimal odour.
- Can be used on a wide variety of surfaces, offering great versatility.
Cons
- The ultra-matte finish can be more prone to showing marks than glossier finishes.
- Requires two coats for optimal depth of colour and durability, increasing application time.
- Not suitable for very wet areas such as shower enclosures or bath surrounds.
- Drying and curing times need to be respected for maximum durability.
Setup, Compatibility & Care Instructions
Preparation: Ensure surfaces are clean, dry, and free from dust, grease, or any loose material. For previously painted surfaces, lightly abrade with fine-grit sandpaper if necessary and wipe clean. No primer is required for most surfaces.
Application: Stir the paint thoroughly before use. Apply with a good quality brush or roller. For best results and full durability, two coats are recommended. Allow adequate drying time between coats (typically 1-2 hours).
Compatibility: Suitable for interior walls, ceilings, bare or painted wood (including furniture and floors), interior woodwork, kitchen cupboards, metal, powder-coated radiators, interior uPVC, and ceramic wall tiles. Avoid use in constantly wet areas like shower trays or bath surrounds.
Care: Once fully cured (allow at least 7 days), the paint can be cleaned using a soft, damp cloth. For tougher marks, a mild detergent can be used sparingly. Avoid abrasive cleaners or scouring pads, as these can damage the ultra-matte finish.