MOTIP SHOCK OIL SPRAY 500ML - Freeze & Release
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for mechanics, DIY enthusiasts, and anyone dealing with stubborn, rusted parts. The MOTIP SHOCK OIL SPRAY offers a powerful, fast-acting solution that freezes parts to -30°C, making them brittle and easier to loosen, while its excellent lubricating properties ensure smooth disassembly and reassembly. A potential caveat is its specialized nature, best suited for heavily rusted or seized components.
All features
| Model Part Number | M090305 |
|---|---|
| Brand | Motip |
Extended Product Information
FAQs
How quickly does the spray work?
The cooling effect is almost instantaneous upon application. Penetration and loosening may take a few minutes depending on the severity of the rust.
What is the maximum temperature drop?
The spray reduces the temperature of the metal parts to approximately -30°C (-22°F).
Can I use this on painted surfaces?
It is not recommended for use on painted surfaces as the extreme cold and chemical composition may damage the paint. Always protect surrounding painted areas.
Is this product flammable?
Yes, like many aerosol products, it contains flammable propellants and should be used away from open flames or sparks.
How much product is in one can?
Each can contains 500ml of product.
What is the weight of the product?
The product weighs approximately 2.2 pounds.
Can this be used on dissimilar metals?
Yes, it can be used on various metal types, but always be mindful of potential reactions or damage to sensitive materials.
Troubleshooting
Spray nozzle is blocked.
Ensure the nozzle is clear. If blocked, try to carefully clear it with a fine pin. If the can is unusable, dispose of it properly.
Part does not loosen after application.
Apply a second burst of spray, allowing more time for penetration and cooling. Reapply lubricant if needed. Gentle tapping with a hammer can also help break the rust bond.
Visible residue after use.
Wipe away excess residue with a clean cloth. If necessary, use a suitable degreaser to clean the area thoroughly once the part has been successfully removed.
Pros and Cons
Pros
- Effectively loosens heavily rusted or seized parts.
- The freezing effect helps break strong rust bonds.
- Excellent lubricating properties prevent damage during disassembly.
- Powerful spray reaches difficult areas.
- Suitable for a variety of applications.
Cons
- Requires caution due to extreme cold generated.
- May not be necessary for lightly rusted or new parts.
- Can leave a residue that may require cleaning.
- Potential for material damage if used on sensitive components.
- Weight of the can is substantial (over 2 lbs).
Setup, Compatibility & Care
Setup: Shake the can well before use. Ensure the area is well-ventilated. Point the nozzle at the rusted part and press the actuator firmly. For best results, apply in short bursts. Allow the spray to penetrate for a few minutes, especially on heavily seized parts, before attempting to loosen them.
Compatibility: This product is designed for use on metal parts. Avoid contact with rubber, plastic, painted surfaces, or sensitive electronic components, as the extreme cold and chemical composition could cause damage. Always test in an inconspicuous area if unsure.
Care: Store the can in a cool, dry place away from direct sunlight and heat sources. Keep out of reach of children. Dispose of the empty can responsibly according to local regulations.