Silca Super Secret Chain Lube 8oz - Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Silca Super Secret Chain Lube is for cyclists seeking the efficiency of a waxed chain with the ease of a drip application. It offers reduced friction and a quieter drivetrain, but requires a very clean chain for optimal performance and a drying period before riding.
All features
| Model Part Number | 850005186304 |
|---|---|
| Brand | Silca |
Extended Product Information
FAQs
How do I prepare my chain for Silca Super Secret Chain Lube?
Your chain must be impeccably clean. This involves removing all old lubricant and grime using a degreaser, rinsing thoroughly, and allowing it to air dry completely. A clean chain is vital for the lube to perform optimally.
What is the drying time before I can ride?
You must allow the lubricant to dry for a minimum of 30 minutes after application before riding your bicycle. This allows the wax-based formula to set properly.
Can I use this lube over my existing lubricant?
No, it is strongly recommended to remove all previous lubricants and contaminants from the chain before applying Silca Super Secret Chain Lube. Applying over old lube will negatively impact performance and adhesion.
How often should I reapply the lube?
Reapplication frequency depends on riding conditions. A general guideline is every 100-150 miles, or more often if you ride in wet, dusty, or muddy environments, or if you notice increased drivetrain noise.
Is this lube suitable for all weather conditions?
It offers excellent performance in dry to moderate conditions. For extremely wet or muddy conditions, its durability might be reduced compared to dedicated wet lubes, and more frequent reapplication may be necessary.
What makes Tungsten Disulfide beneficial?
Tungsten Disulfide is an advanced solid lubricant known for its extremely low coefficient of friction and high stability, even under pressure. It helps create a highly lubricious surface on the chain for maximum drivetrain efficiency.
Is the 'Black' version different in performance from other colors?
The color usually indicates added dyes or specific formulations for visual cues. The core performance characteristics, particularly the lubrication provided by Tungsten Disulfide, remain consistent across color variants unless otherwise specified by the manufacturer.
Troubleshooting
Chain is noisy shortly after application.
Ensure the chain was completely dry and clean before application. Re-clean the chain and reapply, ensuring the minimum 30-minute drying time before riding.
Lube seems to wash off in wet conditions.
While designed for efficiency, extreme wet conditions can reduce the longevity of the wax. Reapply after prolonged wet riding. Consider a heavier-duty lube if you frequently ride in severe wet weather.
Difficulty wiping off excess lube.
Apply the lube sparingly to the rollers only. If excess is difficult to remove, ensure you are using a clean, absorbent cloth. Let it dry slightly for easier removal.
Drivetrain still feels gritty.
The chain may not have been clean enough initially, or there might be contamination. A full degrease and reapplication following the drying instructions should resolve this.
Pros and Cons
Pros
- Achieves near wax-dipped chain performance with easy application.
- Significantly reduces drivetrain noise for a quieter ride.
- Utilizes advanced Tungsten Disulfide for maximum lubrication.
- Environmentally conscious formula.
- Keeps drivetrains cleaner by repelling dirt.
Cons
- Requires a thoroughly clean chain for effective application.
- Needs a minimum of 30 minutes drying time before riding.
- May be less durable in extreme wet conditions compared to some heavy-duty lubes.
- Initial application can be slightly messier than traditional drip lubes if not careful.
Setup, Compatibility & Care Instructions
Setup: The most critical step for using Silca Super Secret Chain Lube is ensuring your chain is exceptionally clean. This typically involves degreasing the chain thoroughly, rinsing it, and allowing it to dry completely before application. Once clean, apply one drop of lube to each roller of the chain. Allow the lube to penetrate for a few minutes, then wipe off any excess from the outer plates. Crucially, let the chain dry for at least 30 minutes before riding to allow the wax to set and form a protective, low-friction layer.
Compatibility: This lubricant is designed for bicycle drivetrains, including chains, derailleurs, and cassettes. It is compatible with most bicycle drivetrains. However, always ensure your chain is clean before applying to avoid mixing with old lubricants.
Care: Reapply as needed, typically every 100-150 miles or sooner if you notice increased noise or friction, especially after riding in wet or dirty conditions. Always clean the chain thoroughly before reapplying if you are switching from a different type of lubricant.