Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This guide is for homeowners looking to add a unique and functional design element to their kitchen. The Warren Reed Designer American Shorthair Cat Face Splashback offers a high-resolution printed, toughened glass surface that acts as a striking focal point, combining aesthetic appeal with practical protection. A key consideration is the specific adhesive required for installation.
| Model Part Number | WR00659-P448 |
|---|---|
| Brand | Warren Reed - Designer |
You must use 'Clear Natural Curing Adhesive' for installation. Using other types of adhesives may damage the product or compromise its hold.
No, the glass splashback is pre-cut to specific dimensions and cannot be altered. Please choose the size that best fits your kitchen.
Clean with a soft, damp cloth and mild soap if necessary. Wipe dry with a lint-free cloth to avoid streaks. Avoid abrasive cleaners.
The high-resolution print is designed for durability. With proper care and cleaning, the design should maintain its vibrancy.
The splashback is available in several sizes, including W600mm x H750mm, W700mm x H750mm, W900mm x H750mm, W600mm x H600mm, W600mm x H650mm, W700mm x H650mm, and W900mm x H650mm.
Yes, the toughened glass provides protection suitable for use behind most standard electric and gas hobs. Ensure there is adequate ventilation and follow manufacturer guidelines for hob installation.
Ensure you are using the specified 'Clear Natural Curing Adhesive'. Verify the wall surface is clean, dry, and free from dust or grease. Allow the adhesive to cure fully as per the product instructions.
Use a clean, lint-free cloth for drying and polishing. Consider using a glass cleaner specifically designed for streak-free results, or a mixture of water and a small amount of vinegar.
Handle the glass with care, ideally with two people. Ensure the wall surface is free from obstructions and has adequate support. If damage occurs, contact customer support for replacement options.
Installation: For installation, it is crucial to use only Clear Natural Curing Adhesive. Ensure the wall surface is clean, dry, and smooth before applying the adhesive. Follow the adhesive manufacturer's instructions for application and curing times. It is recommended to have a second person assist during the mounting process due to the weight of the glass.
Compatibility: This splashback is designed for wall mounting in kitchens. It is compatible with most standard kitchen wall surfaces when the correct adhesive is used. Ensure the area behind the splashback is adequately prepared.
Care: To maintain the pristine appearance of your splashback, clean it regularly with a soft, damp cloth. Avoid abrasive cleaners or scouring pads, which can scratch the glass surface or damage the printed design. For tougher spots, a mild soap solution can be used, followed by a rinse with a clean, damp cloth and a final polish with a dry, lint-free cloth.
