CME 5-Pin DIN MIDI Cables - Pack of 4, 30cm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This 4-pack of CME 5-pin DIN MIDI cables is designed for musicians and producers needing reliable, high-speed data transmission between MIDI devices. The key benefit is their low-latency performance and space-saving angular connectors, ideal for compact setups. A potential caveat is their specific 30cm length, which may require longer cables for certain configurations. These cables feature ultra-thin, high-performance plugs, mirrored 45-degree angular outputs for tight spaces, convenient lugs, nickel-plated connectors, and an oxygen-free copper core with built-in shielding for durability and signal integrity.
All features
| Model Part Number | DIN5-1FT-30CM |
|---|---|
| Brand | CME |
Extended Product Information
FAQs
What does the 30cm length mean for my setup?
The 30cm (approximately 1 foot) length is ideal for connecting devices that are placed directly next to each other, such as a keyboard and a nearby sound module, or a controller and a computer on the same desk. It minimizes cable clutter.
Are these cables suitable for audio signals?
No, these are specifically MIDI cables designed for transmitting digital control data, not analog or digital audio signals.
Can I use these cables with non-MIDI devices that have a 5-pin DIN port?
While the connector is a 5-pin DIN, these cables are wired for standard MIDI protocol. They will only work with devices designed for MIDI communication over a 5-pin DIN connection.
How do the 45-degree angular connectors help?
The angled connectors are designed to plug into MIDI ports at a 45-degree angle, which is useful for connecting gear in tight spaces or when ports are located close to each other. This prevents cables from sticking straight out and potentially obstructing other connections or gear placement.
What is the benefit of an oxygen-free copper core?
An oxygen-free copper core reduces signal degradation and improves conductivity over the length of the cable, contributing to cleaner and more reliable data transmission, especially important for high-speed MIDI signals.
How do I know if my device uses MIDI over 5-pin DIN?
Look for ports labeled 'MIDI IN', 'MIDI OUT', or 'MIDI THRU' on your device. These are typically 5-pin DIN connectors, though some older or specialized devices might use different interfaces.
Does the pack include any adapters?
No, this pack contains four standard 5-pin DIN male to 5-pin DIN male MIDI cables. No adapters are included.
Troubleshooting
No MIDI signal or intermittent connection.
Verify that the cable is fully seated in both MIDI ports. Ensure you are connecting MIDI Out to MIDI In correctly. Check if the MIDI cable is damaged; try a different cable or port if possible. Confirm MIDI settings on both connected devices are configured correctly.
Delayed response or 'choppy' MIDI data.
Ensure the cable is not damaged and is securely connected. Check for potential interference from other electronic devices. Confirm the MIDI data buffer settings on your connected devices are appropriate; ensure high-speed transmission is enabled if available.
Connector feels loose or wobbly.
Gently inspect the port on the device and the connector on the cable for any obstructions or damage. Ensure the cable is the correct type (5-pin DIN). If the device port is damaged, it may require repair.
Pros and Cons
Pros
- Reliable, low-latency MIDI data transfer.
- Angular connectors are excellent for tight setups and preventing strain.
- Durable materials (nickel-plated connectors, oxygen-free copper) ensure longevity.
- Effective shielding minimizes signal interference.
- Compact 30cm length is ideal for desk setups and adjacent devices.
Cons
- The 30cm length may be too short for complex or spread-out setups.
- Pack of 4 may be unnecessary if fewer cables are needed.
- 5-pin DIN connector is specific and not universally compatible with all audio gear.
- Angular connectors might obstruct adjacent ports on some devices.
Setup, Compatibility & Care
Setup: Simply connect the 5-pin DIN male connectors from one MIDI device to another. Ensure the 'MIDI In' port of one device is connected to the 'MIDI Out' port of another, or use the 'Thru' port for daisy-chaining.
Compatibility: These cables are compatible with any device featuring standard 5-pin DIN MIDI ports, including keyboards, synthesizers, drum machines, controllers, audio interfaces, and some guitar pedals.
Care: To maintain optimal performance and longevity:
- Storage: Store cables neatly, avoiding sharp bends or kinks.
- Cleaning: If connectors become dirty, use a dry, soft cloth. Avoid using liquids that could damage the internal components or plating.
- Connections: Ensure connections are secure but do not force them. The lugs are designed for easier handling, not for prying.