U-Pol Power Can Alloy Wheel Paint - Silver - 500ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The U-Pol Power Can Alloy Wheel Paint is a premium aerosol solution designed for automotive enthusiasts and professionals looking to restore the appearance of alloy wheels. This 500ml spray provides a uniform, light-shade metallic silver finish, offering excellent durability for minor repairs and maintenance. While it delivers professional-grade coverage, users should note that achieving a seamless factory finish requires thorough surface preparation and multiple light coats rather than a single heavy application.
All features
| Model Part Number | UPOL Powercan Spray Can Touch Up Paint Car Bike |
|---|---|
| Brand | U-Pol |
Extended Product Information
FAQs
Can I use this on non-alloy wheels?
This paint is specifically formulated for alloy surfaces; while it may adhere to other metals, durability is not guaranteed.
Do I need a clear coat after applying?
While the paint provides a durable finish, applying a clear coat can add extra protection against UV light and brake dust.
Is one 500ml can enough for four wheels?
Yes, one can is generally sufficient for a touch-up of four wheels, depending on the severity of the damage and coverage needed.
How long should I wait before driving the car?
Wait at least 24 hours to allow the paint to fully cure and harden before exposing the wheels to road conditions.
Does this paint match all silver wheels?
It is a standard metallic silver shade designed to match the most common OEM alloy wheel colors, but minor variations may occur depending on your original factory finish.
Troubleshooting
The spray is sputtering or spitting.
Shake the can vigorously for at least two minutes before use and ensure the nozzle is free of dried paint debris.
Paint is running or sagging.
You are applying the coats too heavily. Increase the distance from the wheel and use lighter, faster passes.
Paint is not adhering correctly.
The surface likely has remaining grease or residue. Thoroughly degrease the alloy surface with a wax and grease remover before painting.
Pros and Cons
Pros
- Professional-grade metallic finish
- Easy-to-use aerosol delivery system
- High-quality adhesion to alloy surfaces
- Ample 500ml canister volume for multiple wheels
Cons
- Requires careful surface preparation for best results
- May require multiple coats to reach deep opacity
- Overspray management is necessary during application
Setup, Compatibility & Care
To ensure compatibility, verify that your wheels are genuine alloy and that the surface is completely dry and free of wax or polish before spraying. Always work in a well-ventilated area, preferably outdoors or in a garage with open doors, to avoid inhaling fumes. After use, clear the nozzle by holding the can upside down and spraying for 2-3 seconds to prevent the paint from drying inside the valve. Store the canister in a cool, dry place away from direct sunlight to maintain the integrity of the propellant and paint pigments.