Sealey HVLP Pressure Pot System - 1.7mm
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Sealey HVLP Pressure Pot System with Spray Gun (1.7mm) is designed for professional refinishing shops needing efficient and consistent paint application. This system's key benefit is its ability to handle large paint volumes, reducing the need for frequent refills, although users should be aware that proper maintenance is required for optimal performance.
All features
| Model Part Number | HVLP-79/P |
|---|---|
| Brand | Sealey |
Extended Product Information
FAQs
What type of paints can I use?
The system is designed to work well with a variety of coatings, especially water-based paints. Always check the paint manufacturer's recommendations for compatibility.
How do I clean the spray gun?
Disassemble the spray gun after each use and clean each component with the appropriate solvent for your paint type. Pay close attention to the nozzle and needle.
What air pressure should I use?
Refer to your paint's specifications for recommended PSI. Generally, HVLP systems require lower air pressures.
Can I buy replacement parts?
Yes, components from the HVLP-79/P are available individually.
What causes the spray gun to spit?
Dried paint on the nozzle, incorrect viscosity, or insufficient air pressure can cause spitting. Clean the nozzle and ensure your paint is thinned properly.
How do I adjust the spray pattern?
Use the fan width control on the spray gun to adjust the shape of the spray pattern. Experiment to find the right pattern for your task.
What is the air consumption?
The air consumption is 6-10cfm.
Troubleshooting
Spray gun is spitting paint.
Clean the nozzle and needle. Check for any blockages or dried paint residue. Adjust the paint flow and air pressure.
Poor atomization or uneven spray pattern.
Adjust the fan width and air pressure. Ensure the paint viscosity is correct and suitable for the 1.7mm nozzle.
Paint is not flowing from the gun.
Check the paint flow control and ensure it's open. Check for clogs in the paint lines or nozzle.
Air leaks from the pressure pot.
Check all connections and seals. Tighten any loose fittings or replace damaged seals.
Pros and Cons
Pros
- Large capacity pot for fewer refills.
- Adjustable controls offer precise application.
- Durable and corrosion-resistant gun body.
- Suitable for water-based paints.
- Multiple nozzle sizes available.
Cons
- Requires regular cleaning and maintenance.
- Air consumption of 6-10cfm may require a larger air compressor.
- Users may need to purchase additional nozzle sizes separately.
Setup, Compatibility & Care
- Setup: Connect the air supply to the air regulator on the pressure pot. Fill the pot with paint, ensuring not to exceed the 2L capacity. Adjust the regulator to the recommended PSI for your chosen paint (check paint specifications). Adjust the paint flow and fan width using the controls on the spray gun.
- Compatibility: This system is compatible with a wide range of coatings, especially water-based paints. Ensure the paint viscosity is suitable for HVLP systems. Check the paint manufacturer's recommendations.
- Care:
- After each use, thoroughly clean the spray gun and pressure pot. Disassemble the gun and clean each component with the appropriate solvent for your paint type.
- Regularly check and clean the nozzle and needle for any dried paint buildup.
- Inspect the air regulator and other components for leaks or damage.
- Store the system in a clean, dry place when not in use.