Multipanel Classic Type X Wet Floor Base Profile - Satin Anodised
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for those installing Multipanel Classic bathroom wall panels, specifically focusing on the Type X Wet Floor Base Profile. The key benefit is creating a watertight seal where the floorcovering meets the wall panel, protecting your walls and home from water damage. Be aware that this profile is designed for installations where the panel sits approximately 100mm above the floor, common in wet rooms.
All features
| Brand | Multipanel |
|---|
Extended Product Information
FAQs
What is the purpose of the Type X Wet Floor Base Profile?
The profile creates a watertight seal between the floor covering and the Multipanel wall panels, preventing water damage.
Where is this profile typically used?
This profile is designed for wet room applications and other installations where the floor covering extends up the wall.
What finish does the profile have?
The profile is finished in a stylish satin anodised silver.
How do I install the profile?
The profile can be installed using countersunk screws or adhesive bonding, following the manufacturer's instructions.
Is this profile compatible with other brands of wall panels?
No, this profile is specifically designed for use with Multipanel Classic wall panels.
How do I clean the profile?
Clean the profile with a damp cloth and mild detergent. Avoid abrasive cleaners.
What is the thickness of the panels?
The panels are 11mm thick.
Troubleshooting
Profile not sealing properly.
Ensure the profile is correctly aligned and tightly secured. Check for any gaps and reseal with a suitable sealant if necessary. Make sure that the wall is completely flat.
Difficulty in installing the profile.
Make sure you have all the correct tools such as a level and drill. Read the instructions carefully, and ensure the surface is clean and dry. Consider using a construction adhesive for extra hold.
Pros and Cons
Pros
- Creates a reliable watertight seal.
- Complements modern bathroom aesthetics with its satin anodised silver finish.
- Easy to install, saving time and effort.
- Durable and long-lasting.
- Designed for wet room applications.
Cons
- Specific to installations where the panel sits 100mm above the floor; not suitable for all applications.
- Requires careful alignment and installation for optimal sealing.
- Requires countersunk screws or bonding for secure installation.
Setup, Compatibility & Care
- Preparation: Ensure the wall surface is clean, dry, and level.
- Profile Placement: Position the Type X profile against the wall where the floor covering meets the wall panel, ensuring it sits about 100mm above the floor.
- Installation: Secure the profile using countersunk screws or adhesive bonding, following the manufacturer's instructions. Ensure a tight seal against both the wall and floor covering.
- Panel Installation: Install the Multipanel Classic wall panels, ensuring they sit flush with the profile. Seal the joints between the panel and the profile.
- Compatibility: This profile is specifically designed for use with Multipanel Classic wall panels. Always check for compatibility with other components.
- Care: Clean the profile with a damp cloth and mild detergent. Avoid abrasive cleaners or solvents that could damage the finish.