Phoenix Contact Sub-D Connector - 2311797
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Phoenix Contact 2311797 is a 9-position D-SUB female connector designed for field assembly, ideal for technicians and engineers needing reliable connections in various systems. Its key benefit is universal compatibility and easy, tool-free assembly. A caveat to consider is its lower current rating, making it suitable for signal applications rather than high-power requirements.
All features
| Model Part Number | 2311797 |
|---|---|
| Brand | Phoenix Contact |
Extended Product Information
FAQs
What is the maximum voltage and current rating for this connector?
The voltage rating is 50V, and the current rating is 100mA.
Can this connector be used for both data and power transmission?
Due to its 100mA current rating, it is primarily intended for signal and low-current data transmission. It is not suitable for high-power applications.
Does this connector require special tools for assembly?
No, the Phoenix Contact 2311797 is designed for easy field assembly using knurled screws, requiring no specialized tools.
What is the operating temperature range?
The operating temperature range is from -25°C to +75°C.
Is this connector shielded for electromagnetic interference (EMI)?
Yes, the product highlights indicate a high level of EMC, suggesting it offers good protection against EMI.
How many cable entries does this connector have?
This is an axial version with two cable entries.
What is the pin assignment for this 9-position connector?
The pin assignment is 1, 2, 3, 4, 5, 6, 7, 8, 9 to the screw connection terminal block.
Troubleshooting
No signal transmission after connection
Verify that all wires are correctly terminated in their corresponding screw terminals according to the pin assignment. Ensure the cable is securely connected and the D-SUB mating connector is properly seated.
Intermittent signal drops
Check for loose wire connections at the screw terminals. Inspect the cable for any damage. Ensure the connector is protected from vibration and environmental factors that could affect the connection.
Connector housing not closing properly
Ensure no wires are pinched or obstructing the housing. Confirm that the cable diameter is appropriate for the cable entries.
Pros and Cons
Pros
- Easy and fast field assembly
- Universal application suitability
- High level of electromagnetic compatibility (EMC)
- Secure screw terminal connections
- Compact and space-saving design
Cons
- Limited to 100mA current rating, not suitable for high-power applications
- Requires careful termination for optimal signal integrity
- Operating temperature range is restricted compared to industrial-grade connectors
Setup, Compatibility & Care
Setup:
- Prepare your cable by stripping the appropriate length of outer insulation.
- Separate the individual wires and strip a small amount of insulation from each.
- Using the knurled screws, connect each wire to its corresponding terminal block inside the connector, ensuring the correct pin assignment (1-9).
- Secure the cable entries to prevent strain on the internal connections.
- Close the connector housing.
Compatibility:
This connector is designed to be universally compatible with any system utilizing a 9-pin D-SUB interface. It is suitable for various communication protocols such as RS-232, RS-422, and RS-485, provided the current and voltage ratings are not exceeded.
Care:
Keep the connector clean and free from dust and moisture. Avoid exposing it to temperatures outside its specified operating range (-25°C to +75°C). Periodically inspect the connections for any signs of damage or corrosion. Cleaning can be done with a dry, soft cloth. For stubborn dirt, a slightly damp cloth can be used, but ensure the connector is completely dry before use.