Crown Trade Covermatt Emulsion - White - 10L
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to achieve a professional finish on new build interiors with Crown Trade Covermatt Emulsion. The key benefit is its ability to allow surfaces to dry out without compromising the paint finish, making it ideal for new plaster. However, it's important to note that proper surface preparation is crucial for optimal results. This guide will cover key features, usage, care, and troubleshooting to help you get the best out of this product.
All features
| Colour | White |
|---|---|
| Brand | Crown Trade |
Extended Product Information
FAQs
What surfaces can I use this paint on?
This emulsion is ideal for new plaster and other interior surfaces in new build projects.
How many coats of paint should I apply?
It is recommended to apply two coats for optimal coverage and finish.
Can I use this paint in a bathroom or kitchen?
This paint is designed for interior use, but its suitability for high-humidity areas like bathrooms and kitchens might vary. Consult the manufacturer for specific recommendations.
How long does it take for the paint to dry?
Drying times will vary, so refer to the product label for specific instructions.
How do I clean my brushes and rollers after use?
Clean your tools immediately after use with water and a suitable cleaner, following the manufacturer's instructions.
Is this paint environmentally friendly?
Yes, Crown Trade Covermatt Emulsion is accredited by LEED and BREEAM, making it an eco-friendly choice.
Troubleshooting
Paint is not adhering to the surface.
Ensure the surface is properly prepared, clean, and free of dust, grease, and loose particles. Consider using a primer.
Paint finish is not smooth.
Ensure you are using a quality brush or roller and apply the paint evenly. Avoid over-brushing or over-rolling.
The paint is cracking.
Ensure the surface is completely dry before painting. Avoid applying thick coats; multiple thin coats are better.
Pros and Cons
Pros
- Allows new plaster to dry out without compromising the paint finish.
- Provides a smooth, professional finish.
- Environmentally friendly with LEED and BREEAM accreditations.
- Easy to apply, saving time and effort.
Cons
- Requires proper surface preparation for optimal results.
- May require multiple coats for full coverage, depending on the surface.
- Limited color options (White).
Setup, Compatibility & Care
Setup
- Surface Preparation: Ensure the surface is clean, dry, and free from any loose materials. Fill any holes or cracks with a suitable filler and sand smooth.
- Priming (Optional): While not always necessary on new plaster, a primer can improve adhesion and coverage, especially on highly absorbent surfaces.
- Application: Stir the emulsion thoroughly before use. Apply two coats, allowing the recommended drying time between coats.
Compatibility
This emulsion is specifically designed for use on new plaster and other interior surfaces. It is compatible with most standard painting tools, such as brushes, rollers, and sprayers.
Care
Once the paint is fully dried and cured, clean up any spills immediately with a damp cloth. Avoid harsh chemicals or abrasive cleaners. For general cleaning, a mild soap and water solution is usually sufficient.