Morris Iso 32 Hydraulic Oil - 4x5L
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Morris Iso 32 Hydraulic Oil is designed for users of industrial and off-highway hydraulic systems requiring a premium quality hydraulic fluid. Its key benefit is providing excellent anti-wear protection and enhanced system efficiency through good oxidation and rust inhibition, along with effective anti-foam properties. A potential caveat is ensuring system compatibility, as specialized fluids may have specific requirements.
All features
| Brand | Morris Lubricants |
|---|
Extended Product Information
FAQs
What is the primary function of Morris Iso 32 Hydraulic Oil?
Its primary function is to lubricate, cool, and transmit power in hydraulic systems while providing excellent anti-wear protection, rust and oxidation inhibition, and foam control.
Which industries commonly use this hydraulic oil?
It is recommended for both industrial hydraulic systems (like machine tools) and off-highway hydraulic systems (like construction and agricultural machinery).
What does 'Iso 32' refer to?
'Iso 32' refers to the kinematic viscosity of the oil at 40°C, which is approximately 32 centistokes (cSt). This indicates a light to medium viscosity suitable for many general hydraulic applications.
Can this oil be used in systems requiring HLP or HM type oils?
Yes, Morris Triad hydraulic oils, including this variant, meet standards such as DIN 51502 – type HLP and ISO 6743-4; 2015 – type HM, making it suitable for systems specifying these types.
How does the anti-foam additive benefit my system?
The anti-foam additive helps to control the formation of foam and ensures that any entrained air is rapidly released. This is crucial for maintaining consistent hydraulic pressure, smooth operation, and preventing cavitation or damage.
What are the benefits of its rust and corrosion inhibition?
The excellent rust and corrosion inhibition protects metal components within the hydraulic system from damage caused by moisture and other contaminants, thereby extending the life of the equipment.
How should I store the 4x5L containers?
Store the containers in a cool, dry environment, away from direct sunlight and sources of heat. Ensure they are kept sealed to prevent contamination by moisture or dirt.
Troubleshooting
System exhibits sluggish performance or chatter.
Check fluid level and condition. Air entrainment due to foaming can cause this; ensure the anti-foam additive is effective and the fluid is not over-aerated. Verify the oil is not contaminated.
Excessive heat generation in the hydraulic system.
While this oil offers good oxidation resistance, extreme operating conditions can still lead to overheating. Ensure proper system cooling and check for internal leaks or blockages that might increase work load.
Visible rust or corrosion on hydraulic components.
This is unlikely with proper use of Triad 32, which has excellent rust and corrosion inhibitors. If observed, it may indicate severe contamination, water ingress, or a breakdown of the oil's protective properties due to extreme service life or contamination.
Pros and Cons
Pros
- Provides robust protection against wear and corrosion.
- Enhances hydraulic system efficiency with anti-foam properties.
- Meets numerous industry standards, ensuring broad compatibility.
- Offers good resistance to oxidation for extended fluid life.
Cons
- Specific viscosity (ISO 32) may not be suitable for all temperature ranges.
- Requires careful consideration for systems not designed for HLP/HM type oils.
- Not a general-purpose lubricant; intended for hydraulic applications only.
Setup, Compatibility & Care
Setup: Ensure the hydraulic system is clean and free from contaminants before filling with Morris Iso 32 Hydraulic Oil. Use the recommended filling procedure for your specific equipment.
Compatibility: This oil is formulated to meet stringent industry standards including DIN 51502 – type HLP, ISO 6743-4; 2015 – type HM, and Parker (Denison) HF-0, HF-1, HF-2. Always consult your equipment manufacturer's manual to confirm compatibility with ISO 32 viscosity grade and HLP/HM type hydraulic oils. It is generally compatible with most common seal materials found in hydraulic systems, but testing is recommended for critical applications.
Care: Store the oil in a cool, dry place, away from direct sunlight and extreme temperatures. Keep containers tightly sealed to prevent contamination. Regularly check the hydraulic system for leaks and monitor fluid condition. Scheduled oil analysis can help determine optimal change intervals and identify potential issues early.