Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
The WAGO TOPJOB S Series 2010-402 jumper bar is designed for electricians and panel builders needing a reliable way to create common connections within DIN rail terminal blocks. Its key benefit is providing a secure, insulated, and plug-in solution for bridging multiple terminals efficiently. A potential consideration is its fixed 2-way configuration, which may require multiple jumpers for more complex wiring schemes. This product features a 2-way configuration, a 57A rated current, insulated design, and a pluggable mounting method.
| Model Part Number | 2010-402 |
|---|---|
| Brand | WAGO |
The WAGO 2010-402 jumper has a rated current of 57A.
This jumper is designed for WAGO TOPJOB S Series DIN rail terminal blocks with a 10mm modular spacing.
The WAGO 2010-402 is a 2-way jumper, meaning it can bridge two adjacent terminals.
Yes, the WAGO 2010-402 features an insulated design for enhanced electrical safety.
The jumper has a voltage rating of 800V, but always ensure your entire circuit, including terminal blocks and wiring, is rated appropriately for the application's voltage.
The jumper is pluggable. Align it with the terminal pins and push firmly until it clicks into place. No tools are required for installation.
Ensure you are using a compatible WAGO TOPJOB S Series terminal block with 10mm spacing. Check for any debris or obstructions in the terminal block's jumper slots.
Verify that the current load does not exceed the jumper's 57A rating. Ensure all connections are secure and that the terminal blocks are properly rated for the application.
Remove and reinsert the jumper, ensuring it is fully seated. Check the terminal block itself for any damage or wear.
Setup: The WAGO 2010-402 jumper bar is designed for push-in installation. Ensure the terminal blocks are rated for jumpers and have compatible spacing. Align the jumper with the terminal pins and press firmly until it clicks into place. To remove, gently pull the jumper out.
Compatibility: This jumper is specifically designed for use with WAGO TOPJOB S Series DIN rail terminal blocks with a 10mm modular spacing. Always verify compatibility with your specific terminal block model before installation.
Care: Keep the jumper clean and free from debris. Use a dry or slightly damp cloth for cleaning. Avoid using solvents or abrasive materials that could damage the insulation.
