KAWA Dash Cam OBD Power Cable - OBD to Type-C
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The KAWA Dash Cam OBD to Type-C Power Cable is designed for vehicle owners who want to unlock 24/7 parking surveillance for their dash cam without the hassle of professional hardwiring. It offers a reliable, continuous power supply through the vehicle's OBD-II port, providing peace of mind through intelligent ACC detection and battery protection; however, users should verify their vehicle's OBD-II port compatibility and location to ensure it does not interfere with driving comfort.
All features
| Model Part Number | Dashcam-OBD-Stromkabel |
|---|---|
| Brand | KAWA |
Extended Product Information
FAQs
Will this drain my car battery?
No, the cable features 3-level low voltage protection that automatically cuts power if your car battery voltage drops to a pre-set threshold.
Can I leave this plugged in forever?
Yes, it is designed for permanent installation, but you should monitor your car's battery health if the vehicle remains stationary for extended periods.
Does this work with all KAWA dash cams?
It is designed for KAWA dash cams using a Type-C power input. Check your specific dash cam model's port type before purchasing.
Do I need to be a mechanic to install this?
No, it is a simple plug-and-play installation that requires no mechanical or electrical experience.
What happens if a mechanic needs my OBD port?
The cable is designed to be easily removable; simply unplug the connector from the OBD-II port whenever diagnostic access is needed.
Troubleshooting
Dash cam does not power on
Ensure the OBD-II connector is pushed fully into the port and check if your vehicle's fuse related to the OBD port is intact.
Camera shuts off prematurely in parking mode
Verify the low-voltage protection setting on the cable or camera settings to ensure it isn't triggering too early due to an older, weaker car battery.
Cable is interfering with legroom
Use adhesive cable clips to route the wire tightly against the underside of the dashboard away from the pedals.
Pros and Cons
Pros
- Simple DIY installation without professional tools
- Protects car battery with built-in voltage cutoff
- Enables continuous parking monitoring
- Clean, cable-free aesthetic compared to cigarette lighter adapters
Cons
- Not compatible with all vehicle OBD-II port placements
- Takes up the OBD-II port required for mechanic diagnostic tools
- Some newer vehicles have 'always-on' OBD ports that may require manual disconnection
Setup, Compatibility & Care
- Locate the OBD-II Port: This is typically found under the driver-side dashboard near the steering column or pedals.
- Clean Installation: Route the Type-C cable along the headliner and A-pillar of your car to hide the wiring for a professional look.
- Plug-In: Simply insert the OBD connector into the vehicle port. Ensure the connection is secure.
- Check Compatibility: Before permanent routing, verify that your car’s diagnostic port is compatible and that the cable length is sufficient for your specific vehicle cabin layout.
- Maintenance: Periodically check the cable for signs of wear or loose connections, especially if the camera experiences intermittent power.