Connect Deutsch 8 Pin Receptacle Connector Kit - 37508
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Connect Deutsch 8 Pin Receptacle Connector Kit (37508) is designed for automotive technicians and DIY enthusiasts requiring a high-reliability electrical connection for complex wiring harnesses. It provides a robust, weather-resistant interface for 8-pin circuits, offering a professional-grade alternative to standard connectors. Users should note that this kit requires a specific crimping tool to ensure a proper seal and secure terminal retention, making it less suitable for those without proper specialized equipment.
All features
| Model Part Number | 37508 |
|---|---|
| Brand | Connect |
Extended Product Information
FAQs
Does this kit come with the crimping tool?
No, the kit includes the connector housing, terminals, and wedgelock only. The Laser Part No 7533 is recommended for assembly.
Can I use these for marine applications?
These are primarily designed for automotive environments. For marine use, additional dielectric grease is recommended to further protect against salt-water corrosion.
What is the max current capacity?
The capacity depends on the wire gauge used, but these connectors are typically rated for 13 amps per circuit when using 1.5mm² wire.
Are the terminals insulated?
No, the terminals are non-insulated, which allows for a tighter, more professional crimp that you can cover with adhesive-lined heat shrink.
Can I reuse the terminals?
Terminals should generally not be reused once crimped, as the metal deformation during the initial crimp reduces the mechanical integrity of a second connection.
Troubleshooting
Terminal will not seat in the connector body
Ensure the terminal is oriented correctly according to the keying on the connector and check for bent pins or debris in the cavity.
Connection is loose after assembly
Verify the wedgelock is fully pressed into the locked position and check if the crimp is properly compressed.
Difficulty crimping terminals
Ensure you are using the correct die cavity on the Laser 7533 tool for the specific wire gauge being used.
Pros and Cons
Pros
- High vibration resistance suitable for automotive applications
- Secure locking mechanism prevents connection failure
- Supports a common range of wire gauges for versatile repairs
- Compact design saves space in tight engine bay areas
Cons
- Requires specific crimping tool (Laser Part No 7533) for professional results
- Non-insulated terminals require additional heat-shrink or sleeving for insulation
- Soldering is not recommended, necessitating specific manual crimp skills
Setup, Compatibility & Care
Before starting, verify your wire gauge is between 0.5mm² and 1.5mm². Strip the insulation carefully, ensuring no copper strands are severed. Use the Laser 7533 tool to crimp the terminal onto the wire conductor, followed by a secondary crimp for the insulation strain relief. Slide the terminal into the rear of the connector body until a click is heard, then insert the wedgelock from the front. For maintenance, clean the connector housing with an electrical contact cleaner spray if contamination occurs. Store the remaining components in the original blister pack to prevent terminal damage or oxidation until they are required for future use.