Lindy USB 3.2 Type C to M.2 NVMe & SATA SSD Clone Station - Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Lindy USB 3.2 Type C M.2 NVMe & SATA SSD/HDD Docking & Clone Station is designed for IT professionals, system installers, and technicians who need a versatile tool for data management. Its key benefit is the ability to perform high-speed docking and offline cloning between M.2 NVMe SSDs and 2.5"/3.5" SATA SSDs/HDDs, enabling quick backups, data recovery, and system upgrades. A potential consideration is that it requires a USB 3.2 Gen 2 port for maximum speed, and it supports one M.2 drive and one SATA drive at a time.
All features
| Colour | Black |
|---|---|
| Model Part Number | 43359 |
| Brand | Lindy |
Extended Product Information
FAQs
Can I clone from a SATA SSD to an M.2 NVMe SSD?
Yes, the station supports cloning in both directions: M.2 NVMe to SATA and SATA to M.2 NVMe.
Does this station support M.2 SATA SSDs?
No, this station is specifically designed for M.2 NVMe SSDs and does not support M.2 SATA SSDs.
Do I need to connect the station to a power outlet?
Depending on the model's power requirements and the connected drives, an external power adapter might be included or required for stable operation, especially for 3.5" HDDs. Please check the product packaging and manual.
What is the maximum capacity of drives supported?
The station supports standard M.2 NVMe SSDs and 2.5"/3.5" SATA SSDs/HDDs. Capacity is generally limited by the operating system and drive manufacturer specifications, not the dock itself.
Can I use this station to access two M.2 NVMe SSDs at the same time?
No, the station supports one M.2 NVMe SSD and one SATA drive (2.5" or 3.5") simultaneously.
What USB port speed do I need for 10Gbps transfer?
You need to connect the station to a USB 3.2 Gen 2 or USB 3.1 Gen 2 port on your computer, which provides speeds of up to 10Gbps.
Is the cloning process destructive to the source drive?
No, the cloning process is a read operation from the source drive. The source drive's data remains intact unless there is a hardware failure during the process.
Troubleshooting
Drive not recognized
Ensure the drive is properly seated in its slot. Verify the drive is formatted and compatible. Check the USB connection and try a different port.
Cloning fails or is interrupted
Ensure both source and target drives have sufficient capacity. Check that drives are correctly inserted and powered. Avoid using the computer for intensive tasks during cloning. Refer to the manual for specific cloning error codes.
Slow data transfer speeds
Confirm you are connected to a USB 3.2 Gen 2 (10Gbps) port on your computer. Ensure the USB cable is rated for 10Gbps. Check if the connected drive itself has slower performance limitations.
M.2 drive not working
Verify that the M.2 drive is an NVMe type, as this station does not support M.2 SATA drives. Ensure the M.2 drive is correctly installed in the slot.
Pros and Cons
Pros
- Enables high-speed data transfer up to 10Gbps.
- Facilitates direct drive-to-drive cloning without a computer.
- Supports both M.2 NVMe and SATA storage types.
- Ideal for system upgrades, backups, and data recovery tasks.
- Compatible with a wide range of modern computers via USB-C or USB-A.
Cons
- Requires a USB 3.2 Gen 2 port for optimal performance.
- Supports only one M.2 drive and one SATA drive at a time.
- Offline cloning requires careful attention to source and target drive selection.
- Does not support basic SATA SSDs in the M.2 slot, only NVMe.
Setup, Compatibility & Care
Setup:
- Connect the docking station to a power source using the provided cable (if applicable).
- Insert your M.2 NVMe SSD into the designated M.2 slot and your 2.5" or 3.5" SATA SSD/HDD into the SATA port.
- Connect the station to your computer using the USB 3.2 Gen 2 Type-C cable.
- For cloning, ensure the source and target drives are correctly inserted and follow the device's specific cloning procedure (refer to the user manual for button operations).
Compatibility:
- Host Interface: USB 3.2 Gen 2 (3.1 Gen 2) Type-C port on your computer is required for maximum 10Gbps speeds. It is backward compatible with USB 3.0/3.1 Gen 1/3.2 Gen 1 (5Gbps) and USB 2.0 ports, though at reduced speeds.
- Storage Drives: Supports one M.2 NVMe SSD and one 2.5" or 3.5" SATA SSD or HDD. Ensure your M.2 drive is NVMe protocol, not SATA.
- Operating Systems: Compatible with Windows, macOS, and Linux operating systems that support USB storage devices.
Care:
- Keep the device in a dry environment away from extreme temperatures. Avoid direct sunlight.
- Clean the exterior with a soft, dry cloth. Do not use liquids or abrasive cleaners.
- Ensure proper ventilation to prevent overheating, especially during extended use or cloning operations.
- Handle storage drives with care to avoid static discharge.