Hudson Reed Juno Vanity Unit and Basin - Metallic Slate
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Hudson Reed Juno Vanity Unit with Thin-Edge Basin in Metallic Slate is designed for homeowners seeking a stylish, durable, and space-efficient bathroom storage solution. Its primary benefit is the generous under-basin storage combined with a modern, stable floor-standing design. A potential caveat is that taps and waste are sold separately, requiring an additional purchase. This 800mm unit features moisture-resistant MFC construction, soft-close doors with D-handles, and a pre-drilled ceramic basin ready for a monobloc tap. It arrives fully assembled for straightforward installation, offering a refined metallic slate finish.
All features
| Colour | Grey |
|---|---|
| Model Part Number | JNU2605D |
| Brand | HUDSON REED |
Extended Product Information
FAQs
Does the vanity unit come with a tap and waste?
No, the taps and waste fittings are sold separately. You will need to purchase these in addition to the vanity unit.
What type of tap should I use with this basin?
The basin is pre-drilled with one tap hole, making it compatible with a standard monobloc mixer tap.
How do I clean the metallic slate finish?
Wipe the surface with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals, which could damage the finish.
Is the basin reversible?
The basin is designed with a specific tap hole placement and cannot be reversed.
What is the warranty period for this vanity unit?
The Hudson Reed Juno Vanity Unit and Basin is backed by a 5-year manufacturer's guarantee.
Do I need to assemble the unit myself?
No, the vanity unit is supplied fully assembled, saving you time and effort during installation.
What are the dimensions of the vanity unit?
The unit is 800mm wide. Specific depth and height details should be confirmed with the product specifications if needed.
Troubleshooting
Unit is not level
Ensure the floor is even. If the floor is uneven, consider using shims under the unit's base to achieve a level and stable position.
Doors are not closing properly
Check for any obstructions inside the unit or around the hinges. Adjust the hinges if necessary by following the manufacturer's instructions for hinge adjustment.
Water not draining from the basin
Verify that the waste trap is correctly installed and not blocked. Ensure the overflow is also clear.
Pros and Cons
Pros
- Offers substantial storage space for bathroom necessities.
- The fully assembled nature simplifies installation significantly.
- Durable construction is well-suited for bathroom humidity.
- Soft-close doors add a premium feel and practical quietness.
- The metallic slate finish provides a sophisticated visual upgrade.
Cons
- Taps and waste fittings are not included and must be purchased separately.
- The unit requires adequate floor space due to its floor-standing nature.
- Being fully assembled, it might be more challenging to maneuver into tight spaces before installation.
Setup, Compatibility & Care
Setup:
This vanity unit is supplied rigid and fully assembled, making installation straightforward. Ensure the floor is level before placement. Connect your chosen monobloc tap to the pre-drilled hole in the basin. Connect the waste and trap to the basin's outlet and then to your bathroom's plumbing.
Compatibility:
- Taps: Compatible with standard monobloc mixer taps (sold separately).
- Waste: Requires a standard basin waste and trap (sold separately).
- Plumbing: Standard UK bathroom plumbing connections.
Care:
Clean the unit and basin using a soft, damp cloth. Avoid abrasive cleaners or scouring pads, as these can damage the finish and the ceramic basin. Wipe up any spills immediately to prevent moisture damage. Periodically check that all connections are secure.