Devcon 33345 - High Strength 2 Ton Epoxy Resin
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Devcon 2 Ton Epoxy is designed for DIY enthusiasts and home repair projects, offering a strong and water-resistant adhesive solution for various materials. Its primary benefit is the high tensile strength of 2500 PSI, ensuring durable bonds. A potential caveat is its rapid curing time, which requires prompt application once mixed. The product features an easy-to-use dual syringe for accurate mixing and dispenses a total of 9oz of adhesive, drying to a clear to light yellow finish.
All features
| Model Part Number | 33345 |
|---|---|
| Brand | Devcon |
Extended Product Information
FAQs
What is the shelf life of Devcon 2 Ton Epoxy?
Typically, unopened epoxy has a shelf life of 1-2 years when stored in a cool, dry place. Once mixed, it has a working life of approximately 30 minutes.
Can this epoxy be used for repairs on food-safe surfaces?
This product is not specifically rated as food-safe. It is recommended for general repairs and should not be used on surfaces that come into direct contact with food.
How long does it take to fully cure?
The epoxy has a handling time of 30 minutes and a set time of 30 minutes. It will fully cure in approximately 24 hours.
Can I use this on flexible plastics like polyethylene or polypropylene?
This epoxy is not recommended for bonding flexible plastics such as polyethylene or polypropylene. Special adhesives are usually required for these types of materials.
What is the maximum temperature the bond can withstand after curing?
While specific temperature resistance varies, 2-ton epoxies generally offer good resistance to moderate heat. Consult the product's technical data sheet for precise temperature limits.
How do I clean up uncured epoxy?
Uncured epoxy can typically be cleaned up with a dry cloth or by using a solvent like acetone or denatured alcohol. Always test solvents on an inconspicuous area first.
Troubleshooting
Epoxy not curing or curing slowly
Ensure both epoxy and hardener were dispensed and mixed in equal proportions. Verify that the ambient temperature is within the recommended range for curing. Check that the product has not expired.
Weak bond or delamination
Ensure surfaces were properly cleaned and prepared before application. Verify that the correct mixing ratio was used. Allow sufficient cure time before stressing the bond.
Difficulty dispensing from syringe
Ensure the mixing nozzle is properly attached. Try gently wiggling the plungers. If the product has started to cure inside the syringe, it may be unusable.
Unwanted yellowing after cure
This is normal for this product; it dries to a clear to light yellow color. For applications requiring a perfectly clear finish, consider a different product formulation.
Pros and Cons
Pros
- Extremely strong bond with 2500 PSI tensile strength
- Fast handling and setting times for efficient repairs
- Water-resistant formula suitable for various environments
- Bonds well to a wide array of common materials
- Convenient dual syringe for accurate mixing
Cons
- Rapid curing requires quick application after mixing
- May not be suitable for applications requiring extremely long working times
- Dries to a light yellow hue, which might be visible on certain materials
- Requires proper surface preparation for optimal adhesion
Setup, Compatibility & Care
Setup:
- Ensure surfaces to be bonded are clean, dry, and free from dust, grease, or oil. Lightly roughen smooth surfaces for better grip.
- Attach the mixing nozzle to the dual syringe.
- Push the plungers simultaneously to dispense equal amounts of epoxy and hardener onto a clean disposable surface.
- Mix thoroughly with a stirring stick until a uniform color is achieved.
- Apply the mixed adhesive to one surface and join the parts within 30 minutes.
- Secure the parts with tape or clamps and allow to cure.
Compatibility: This epoxy is compatible with acrylic, china, fiberglass, metal, wood, concrete, ceramic, and glass.
Care: Store in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the cap is securely closed after use to prevent premature curing. Clean up uncured epoxy with a dry cloth or solvent (check product label for specific solvent recommendations). Cured epoxy is difficult to remove.