Connect Mate-N-Lok 15 Pin Connector Kit - 35 Piece Set - 37517
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This 35-piece Connect Mate-N-Lok 15 Pin Connector Kit is designed for professionals and DIY enthusiasts needing to create reliable 15-pin electrical connections. It offers a comprehensive set of components for building secure wire-to-wire connections, though it requires specific tools for proper crimping and assembly. The kit provides two housing options (male and female) along with corresponding terminals and seals for environmental protection.
All features
| Model Part Number | 37517 |
|---|---|
| Brand | Connect |
Extended Product Information
FAQs
What tools are needed to assemble this connector kit?
A specialized crimping tool designed for the Connect Mate-N-Lok terminals is required for proper assembly. Wire strippers and a basic terminal insertion tool may also be helpful.
Can I use insulated terminals with this kit?
This kit includes non-insulated terminals. Using insulated terminals may not be compatible with the housing design and seals, and could affect the integrity of the connection.
Are the weatherproof seals reusable?
The weatherproof seals are designed to create a tight fit. While they can be carefully removed and reinserted, repeated removal may degrade their sealing effectiveness over time.
What is the maximum wire gauge supported by the terminals?
The specific wire gauge compatibility depends on the exact terminal part numbers (OEM 350552-1 and 350551-1). Consult the terminal specifications or test with your wire gauge to ensure a proper crimp.
How many complete connectors can be made with this kit?
The kit contains one male and one female 15-pin housing, along with 15 male and 15 female terminals. This allows for the creation of one complete 15-pin male-to-female connector pair, with extra terminals provided.
What does OEM stand for in the part numbers?
OEM stands for Original Equipment Manufacturer, indicating these are genuine parts often used by manufacturers in their equipment.
Troubleshooting
Connector not mating properly
Check that terminals are fully inserted into their respective housings and that no wires are obstructing the mating surfaces. Ensure the correct male and female components are being used.
Poor electrical connection or intermittent signal
Verify that terminals were crimped correctly to the wires. Loose or improperly crimped connections are the most common cause. Re-crimp or replace terminals if necessary.
Weather seals not effective
Ensure seals are correctly positioned on the wires and that the connector halves are fully engaged. Damaged or missing seals will compromise weatherproofing.
Pros and Cons
Pros
- Provides all essential components for a 15-pin connection.
- Includes weatherproof seals for enhanced durability.
- Offers both male and female connector housings.
- Genuine Connect components ensure compatibility.
Cons
- Requires specialized crimping tools not included in the kit.
- Terminals are non-insulated, necessitating careful wiring practices.
- Designed for specific applications; not a universal connector solution.
Setup, Compatibility & Care
Setup:
- Prepare Wires: Strip the insulation from the ends of your wires to the appropriate length as recommended by the terminal manufacturer.
- Crimp Terminals: Using a compatible crimping tool, firmly crimp the non-insulated male terminals onto the male connector wires and the non-insulated female terminals onto the female connector wires. Ensure a secure connection without damaging the wire strands.
- Insert Terminals: Carefully insert the crimped terminals into their corresponding cavities in the connector housings. Male terminals go into the male housing, and female terminals into the female housing.
- Attach Seals: Slide the weatherproof wire seals onto the wires before inserting terminals into the housings, ensuring they are positioned correctly to create a seal around the wire entry point. Place the interface seal between the two connector halves.
- Mate Connectors: Align the male and female connector housings and push them together until they latch securely.
Compatibility:
This kit is specifically designed for the Connect Mate-N-Lok system. The terminals and housings are engineered to work together. Ensure that the wire gauge you are using is compatible with the terminal size for optimal crimping and electrical performance.
Care:
- Inspect the connector periodically for any signs of damage or corrosion, especially if used in harsh environments.
- Clean the exterior of the connector with a dry or slightly damp cloth. Avoid using solvents or abrasive cleaners.
- Ensure the weatherproof seals remain intact and properly seated to maintain their protective function.