Angled Cooker Hood Touch Screen Wall Mounted Range Hood Extractor with LED - Black

Currently unavailable

Currently unavailable
This guide is for anyone seeking an efficient and stylish solution to maintain a fresh kitchen environment. The Angled Cooker Hood effectively removes cooking odors, steam, and grease, significantly improving air quality. While it offers versatile installation options, remember that carbon filters for internal recirculation are sold separately.
| Colour | Black |
|---|---|
| Model Part Number | 0633406646178 |
| Brand | Living and Home |
No, this cooker hood offers dual exhaust modes: you can choose to vent it outside (ducted-out) or use it in recirculation mode, filtering the air and returning it to your kitchen. For recirculation, carbon filters are required and sold separately.
No, carbon filters are not included and must be purchased separately if you intend to use the hood in internal recirculation mode.
The 5-layer aluminum grease filters should be cleaned regularly, typically every 2-4 weeks, depending on your cooking frequency and habits. They are detachable and can be washed by hand or in a dishwasher.
The main body dimensions of the hood are 597mm (width) x 373mm (depth) x 403mm (height). It also features an adjustable chimney height, allowing for flexibility during installation.
The hood features built-in LED lights to illuminate your cooking area effectively and efficiently.
While DIY installation is possible for experienced individuals, professional installation is recommended, especially for ducted setups or if you are not comfortable with electrical or structural work. Always follow the installation instructions carefully.
This cooker hood provides a strong suction power of 400m³/h, effectively removing cooking odors, steam, and oil.
Check the power supply. Ensure the hood is correctly plugged in and the circuit breaker hasn't tripped. If connected, try a power cycle by switching it off at the main power for a few minutes, then turning it back on. Clean the touch panel as sometimes grime can interfere with responsiveness.
Verify that the fan speed is set appropriately for your cooking activity. Check the 5-layer aluminum grease filters; if they are clogged, clean them thoroughly. For ducted systems, ensure the ductwork is not blocked, kinked, or leaking. For recirculation, check if the carbon filters (if installed) are due for replacement.
Ensure the hood is securely mounted to the wall and all installation screws are tightened. Check for any loose parts within the hood or ducting. Verify that the grease filters are correctly installed. For ducted systems, ensure the ducting is not too restrictive or has sharp bends. > Info needed: Specific noise level at different fan speeds would help users assess this.
Check the power connection to the hood. If the hood is receiving power and the fan operates, but the lights do not, this may indicate an issue with the LED module. Contact customer support for further assistance.
Ensure that carbon filters are correctly installed. Carbon filters are crucial for odor absorption in recirculation mode. If they are installed, they might be saturated and require replacement. Refer to the carbon filter's instructions for replacement frequency.