Sealey Lower Ball Joint Socket - Peugeot 405/Citroen - SX027
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for mechanics and DIY enthusiasts working on Peugeot 405 and Citroen vehicles. It helps you effectively use the Sealey SX027 Lower Ball Joint Socket to service lower ball joints, saving time and effort. Note that while this tool is designed for various fittings, proper application of force and care is necessary to avoid damaging components.
All features
| Model Part Number | SX027 |
|---|---|
| Brand | Sealey |
Extended Product Information
FAQs
What vehicles is this tool compatible with?
The Sealey SX027 is specifically designed for Peugeot 405 and Citroen vehicles.
What size drive is required?
The tool requires a 35mm hex drive.
What is the internal clearance of the socket?
The internal clearance is 19mm.
What material is the socket made of?
The socket is made from heat-treated alloy steel.
How do I maintain the tool?
Clean the tool after each use and store it in a dry environment to prevent rust.
What is the purpose of the 50mm ring with drive pegs?
The ring and drive pegs fit into the slots on the ball joint flange, ensuring secure engagement and efficient removal/installation.
Can I use this tool on non-OEM ball joints?
Yes, the 19mm internal clearance is designed to accommodate various OEM and non-OEM fittings.
Troubleshooting
The socket doesn't fit properly.
Double-check that you're using the tool on a compatible vehicle model (Peugeot 405 or Citroen) and that the internal clearance of 19mm is suitable for your ball joint.
The tool is slipping off the ball joint.
Ensure the drive pegs are fully engaged in the ball joint flange slots. Apply force squarely and evenly to prevent slippage.
Tool seems to be bending.
Check your application method and ensure you are not applying force to the tool at an angle, this will cause premature tool failure.
Pros and Cons
Pros
- Precision-engineered for specific vehicle applications.
- Durable construction ensures long-term reliability.
- Simplifies the process of removing and installing lower ball joints.
- Compatible with a wide range of fittings.
- Saves time and effort compared to generic tools.
- Heat-treated steel increases the lifespan of the tool
Cons
- Limited to specific vehicle models (Peugeot 405 and Citroen).
- Requires some mechanical knowledge and experience.
- May require additional tools for complete ball joint service.
- Can be damaged if excessive force is applied incorrectly.
- Not suitable for all lower ball joint types.
Setup, Compatibility & Care
- Preparation: Ensure the vehicle is properly supported on jack stands and the wheel is removed.
- Tool Attachment: Place the Sealey SX027 over the ball joint, ensuring the drive pegs engage the flange slots.
- Application: Use a 35mm hex drive tool to apply force, loosening and removing the ball joint.
- Compatibility: This tool is compatible with Peugeot 405 and Citroen models; please verify fitment before use.
- Care: Clean the tool after each use. Store in a dry environment to prevent rust and maintain its effectiveness.