Carlube Copper Grease - 70g Tube x6

No. It should only be applied to the *back* of the brake pads or caliper mounting points. Never apply it to the friction material of the pad or the brake disc surface, as this will severely compromise braking performance.

Its primary benefit is to prevent metal-on-metal seizure and galling, ensuring that threaded components can be easily disassembled even after exposure to heat, corrosion, or pressure.

Yes, copper grease is generally safe for use on aluminum and other metals. Its anti-corrosive properties are beneficial in preventing galvanic corrosion between dissimilar metals.

A thin, even layer is usually sufficient. The goal is to coat the threads or mating surfaces to provide a barrier, not to apply a thick, excessive amount.

While it can be used on battery terminals for corrosion protection, it is not recommended for general electrical connections where conductive greases or specific electrical contact cleaners are more appropriate.

Key applications include spark plug threads, exhaust clamps, wheel studs, battery terminals, and any threaded fasteners that may be difficult to remove due to corrosion or high temperatures.

It acts as an anti-seize compound and lubricant for threaded fasteners and mating surfaces, primarily to prevent seizing and galling, rather than as a high-speed or heavy-load bearing lubricant.

Ensure the product has not been exposed to extreme temperatures for prolonged periods. If it has hardened, gentle warming might help, but avoid overheating. Ensure surfaces are clean and dry.

Ensure an adequate amount of grease was applied evenly to the entire thread length. Verify that the components were not overtightened beyond recommended torque, which can sometimes cause thread damage regardless of lubrication.

Ensure the tube cap is securely closed after each use. Store in a clean environment and avoid using contaminated tools for application.